King Plastic Wood Grain Polymer Sheet 1/2" Mocha Brown 48''x96'' 36.3 kg
Description
King StarBoard® WG is a high-density polyethylene sheet with a wood grain finish. It is the product of a proprietary process called K-Stran™, the most advanced manufacturing process for superior flatness and consistency. King StarBoard® WG has a wood grain finish on both sides of the sheet. It is environmentally stabilized to withstand the harshest outdoor conditions. King StarBoard® WG will not rust, delaminate or rot when exposed to UV, humidity or water.Available in large sheets 48” x 96”.
King Plastic pioneered King StarBoard®, the original marine-grade polymer sheet. Now, we deliver the highest performance and durability in our new wood grain plastic sheet King StarBoard® WG with elegance and casual sophistication for outdoor living. King StarBoard® WG, the all-weather wood grain polymer sheet inspiring everyone to live outdoors.
Applications:
Fire Pits | Hatches and Doors |
Indoor and Outdoor Cabinets | Frames and Trim |
Outdoor Cabinetry & Storage | Furniture |
Outdoor Furniture | Marina Architecture & Storage |
Planters | Marina Cabinetry |
Accessories | Steps |
Boat Components | Swim Platform inserts |
Additional Info:
King StarBoard® WG is upgradable to King MicroShield® with an advanced antimicrobial technology for protecting the product surface against stain and odor causing bacteria, algae and fungi.
King StarBoard® WG is upgradable with King FlameShield, for ASTM E-84 Class A Flame Compliance and CAN/ULC-S102 for Canadian Compliance. Protect Your Interests with E-84 Class A Flame Compliance Polymer Sheets from King Plastic Corporation Available as an Upgrade with King FlameShield
The ASTM E84
This test method is intended to compare the surface flame spread and smoke developed measurements to those obtained from the tests of mineral fiber cement board and select grade red oak flooring. The results are expressed as Flame Spread Index and Smoke Developed Index.
Results
Class A Interior Finish:
Flame Spread Index 0-25, Smoke Developed Index 0-450. Includes any material classified at 25 or less on the flame spread test scale and 450 or less on the smoke developed test scale. Any element thereof when so tested shall not continue to propagate fire.
Physical Properties | |||
Properties | Units | ASTM | Nominal Values |
Density | g/cc | D1505 | 0.955 |
Tensile Strength @ Yield | psi | D638 | >4,100 |
Tensile Modulus | psi | D638 | 255,000 |
Elongation @ Break | % | D638 | >600 |
Elongation @ Yield | % | D638 | 9.8 |
Flexural Modulus | psi | D790 | 185,000 |
Flexural Stress @ 5% Strain | psi | D790 | 3,810 |
Compressive Properties 10% Strain | psi | D695 | 4,950 |
Durometer | Shore D | D2240 | 68 |
Tensile Impact | ft.lbs./in.2 | D1822 | 115 |
Izod Impact Resistance | ft.lbs./in.2 | D256 | 1.1 |
Brittleness Temp. | ºC (ºF) | D746 | <-76ºC (<-105ºF) |
Vicat Softening Temp. | ºC (ºF) | D1525 | 123ºC (253ºF) |
Heat Deflection Temp. 66 psi | ºC (ºF) | D648 | 75ºC (167ºF) |
Screw and Nail Withdrawal | lbs | D1761 | 657 & 63 |
Flammability | Rating | UL94 | HB |
All values are determined on specimens prepared according to ASTM standards. | |||
Nominal values should not be interpreted as specifications. | |||
King StarBoard® WG is made entirely from FDA and USDA approved material. | |||
King StarBoard® WG meets ASTM 4976. | |||
King StarBoard® WG contains no VOC’s. |
Standard Sheet Size | ||
in: | 48″ x 96″ | |
mm: | 1219mm x 2438mm | |
Standard Gauges | ||
in: | 1/2″ | 3/4″ |
mm: | 12.7mm | 19mm |
Approximate Weight | ||
lbs: | 80 lbs | 120 lbs |
kg: | 36.3kg | 54.4kg |
Tolerance information: | ||
Gauges 1/4″ up to 1-1/2” ± 5% | Length and width plus only at room temperature | ||
Custom sheet sizes, gauges and colors available |
-
Physical Specification
Physical Properties Properties Units ASTM Nominal Values Density g/cc D1505 0.955 Tensile Strength @ Yield psi D638 >4,100 Tensile Modulus psi D638 255,000 Elongation @ Break % D638 >600 Elongation @ Yield % D638 9.8 Flexural Modulus psi D790 185,000 Flexural Stress @ 5% Strain psi D790 3,810 Compressive Properties 10% Strain psi D695 4,950 Durometer Shore D D2240 68 Tensile Impact ft.lbs./in.2 D1822 115 Izod Impact Resistance ft.lbs./in.2 D256 1.1 Brittleness Temp. ºC (ºF) D746 <-76ºC (<-105ºF) Vicat Softening Temp. ºC (ºF) D1525 123ºC (253ºF) Heat Deflection Temp. 66 psi ºC (ºF) D648 75ºC (167ºF) Screw and Nail Withdrawal lbs D1761 657 & 63 Flammability Rating UL94 HB All values are determined on specimens prepared according to ASTM standards. Nominal values should not be interpreted as specifications. King StarBoard® WG is made entirely from FDA and USDA approved material. King StarBoard® WG meets ASTM 4976. King StarBoard® WG contains no VOC’s.
-
General Specification
Standard Sheet Size in: 48″ x 96″ mm: 1219mm x 2438mm Standard Gauges in: 1/2″ 3/4″ mm: 12.7mm 19mm Approximate Weight lbs: 80 lbs 120 lbs kg: 36.3kg 54.4kg Tolerance information: Gauges 1/4″ up to 1-1/2” ± 5% | Length and width plus only at room temperature Custom sheet sizes, gauges and colors available
Product Options
Product | OEM | EEPN | Availability | Price | Qty |
---|---|---|---|---|---|
15.01.0213
|
AED 1,523.00
|
|
|||
15.01.0214
|
AED 1,732.00
|
|
|||
15.01.0215
|
AED 835.00
|
|
|||
15.01.0216
|
AED 1,732.00
|
|
|||
15.01.0217
|
AED 1,002.00
|
|