Smart Gyro SG20 Stabilizer
Description
SG20 45 - 55'Smartgyro SG20 is the gyro stabilizer of choice for boats from 45-55 ft. Ideal for both new builds and refit installations, the stabilizer can be fully serviced on-board the vessel without the need to lift out for maintenance, ensuring significant time and cost savings.
THE FUTURE OF MARINE STABILIZATION
MODULAR DESIGN
The Smartgyro unit can be serviced, maintained, and assembled directly inside the boat.
LIQUID COOLING
The liquid cooling system dissipates heat generated by the motor and spinning bearings while also cooling the inverter and hydraulic manifold.
VACUUM ENCLOSURE
The sealed vacuum flywheel enclosure minimizes air drag to increase performance and reduce heat and power consumption.
CONTROL ELECTRONICS
The gyro control module uses motion sensors and an Inertial Measuring Unit (IMU) to monitor and process real-time boat behavior data.
BRAKING SYSTEM
The pressurized, closed loop braking system dynamically controls the gyro using hydraulic cylinders and proportional valve.
DRIVING PERFORMANCE
The Smartgyro automatically locks the gyro’s counteracting forces during high-speed turns to make for smoother sailing.
Target Boat
|
45 – 55’ or up to 25 tons |
Maximum Rated Speed
|
9.500 RPM |
Angular Momentum
|
5.900 Nms at max. rated speed |
Anti-Rolling Torque
|
15.500 Nm at max. rated speed |
Input Voltage (AC)
|
115V nominal, 50/60 Hz, single phase 220V nominal, 50/60 Hz, single phase |
Input Voltage (DC)
|
12 Vdc |
Envelope Dimensions
|
0.76 x 0.77 x 0.65 m [29.9 x 30.3 x 25.6 in] |
Weight
|
495 kg [1091 lbs] |
-
Technical Specification
Target Boat45 – 55’ or up to 25 tons Maximum Rated Speed9.500 RPM Angular Momentum5.900 Nms at max. rated speed Anti-Rolling Torque15.500 Nm at max. rated speed Input Voltage (AC)115V nominal, 50/60 Hz, single phase
220V nominal, 50/60 Hz, single phaseInput Voltage (DC)12 Vdc Envelope Dimensions0.76 x 0.77 x 0.65 m [29.9 x 30.3 x 25.6 in] Weight495 kg [1091 lbs]