Smart Gyro SG60 Stablizer
Description
SG60 55 - 65'. Smartgyro SG60 is the gyro stabilizer of choice for boats from 55-65 ft. Ideal for both new builds and refit installations, the stabilizer can be fully serviced on-board the vessel without the need to lift out for maintenance, ensuring significant time and cost savings.
THE FUTURE OF MARINE STABILIZATION
MODULAR DESIGN
The Smartgyro unit can be serviced, maintained, and assembled directly inside the boat.
LIQUID COOLING
The liquid cooling system dissipates heat generated by the motor and spinning bearings while also cooling the inverter and hydraulic manifold.
VACUUM ENCLOSURE
The sealed vacuum flywheel enclosure minimizes air drag to increase performance and reduce heat and power consumption.
CONTROL ELECTRONICS
The gyro control module uses motion sensors and an Inertial Measuring Unit (IMU) to monitor and process real-time boat behavior data.
BRAKING SYSTEM
The pressurized, closed loop braking system dynamically controls the gyro using hydraulic cylinders and proportional valve.
DRIVING PERFORMANCE
The Smartgyro automatically locks the gyro’s counteracting forces during high-speed turns to make for smoother sailing.
Target Boat
|
55 – 65’ or up to 50 tons |
Maximum Rated Speed
|
5.500 RPM |
Angular Momentum
|
12.500 Nms at max. rated speed |
Anti-Rolling Torque
|
25.000 Nm at max. rated speed |
Input Voltage (AC)
|
220V nominal, 50/60 Hz, single phase |
Input Voltage (DC)
|
24 Vdc |
Envelope Dimensions
|
1.08 x 1.11 x 0.87 m [42.4 x 43.7 x 34.3 in] |
Weight
|
910 kg [2006 lbs] |
-
Technical Specification
Target Boat55 – 65’ or up to 50 tons Maximum Rated Speed5.500 RPM Angular Momentum12.500 Nms at max. rated speed Anti-Rolling Torque25.000 Nm at max. rated speed Input Voltage (AC)220V nominal, 50/60 Hz, single phase Input Voltage (DC)24 Vdc Envelope Dimensions1.08 x 1.11 x 0.87 m [42.4 x 43.7 x 34.3 in] Weight910 kg [2006 lbs]