Rim drive POD steeerable AZ 11.0 48V 230A IP68 120Nm torque length

Description

There are multiple reasons to select a electric motor for your application, but there are many reasons to select a Rim Drive Technology motor over combustion or another electric motor. A Rim Drive motor has an immediate acceleration response. Uniquely combined with the stepless control system, it provides you with the highest feeling of maneuverability. Almost every alternative competitive motor has a central axis, which is very sensitive to ropes, weeds and fishing nets. The fact of not having a center axis limits the chance of materials getting stuck in the propeller. These
motors can produce high torque, a valued feature among the owners of heavier boats. Due to its compact and lightweight design, it is possible to install it in the smallest compartments. During the design phase,they have set goals to minimize installation and service costs for users. By having just one rotating part, they have achieved minimized maintenance costs. On the other
hand, they succeeded in replacing an anode or propeller within less than two minutes. All their products are saltwater resistant to ensure ease of installation for every boat owner. In addition to this, all motors are certified with an IP68 rating.

What is included in a Steerable POD system?
Each Steerable POD system will be delivered with the following components:
• Stainless steel gear housing inclusive gears.
• Electronic DC motor for rotational steering movements.
• Reductor to translate the rotational movements from the DC motor to the gears.
• Steerable POD hull sealing (125 mm high).
• Mounting plate for strong and easy mounting solutions.
• A Steerable POD electronic control unit (ECU) which makes it possible to realize several steering configurations.
• A Steerable POD cable and connector set, standard 2 meter.
The Steerable POD motors can be controlled by a steering wheel or a joystick

Key Features:

• Maximum input power of 11.0kW
• Nominal voltage of 48V
• Equivalent to a 20PK petrol motor
• Including cable set (2 meter)
• Minimal weight of 32kg
• Efficiency of more than 90%
• Completely waterproof (IP68)
• Average operating time of 7 hours with our 48V 200Ah battery (2 units)
• Rotatable up to 200 degrees
• Waterproof hull passthrough
• Motor controller included