JL Audio Amplifier 24V 800W M800/8 8CH class D full range for systems with negative ground only
Description
This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its eight channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is JL Audio’s NexD™ ultra-high-speed switching design, which allows for full bandwidth class D operation with extremely low distortion and outstanding efficiency. The M800/8v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. The M800/8v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or dc-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately) you have the ability to control the level of two, four, six, or all eight of the amplifier’s channel levels from the driver’s seat.
Use it in one of many useful configurations:
- Eight-channel satellite Amp: drive four pairs of speakers with 75 W x 8
- Six-Channel system Amp: drive front and rear satellites with 75 W x 4 @ 4Ω, plus two 4Ω subwoofers with 200 W each
- Staggered six-channel satellite Amp: drive two speakers with 200 W x 2 @ 4Ω, plus four 4Ω speakers with 75 W each
- Big four-channel satellite Amp: bridge to produce 200W x 4 @ 4Ω
- Four-channel system Amp: drive left and right speakers with 200W x 2 @ 4Ω, plus two 4Ω subwoofers with 200W each
This marine amplifier features white and grey powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in
the marine environment. This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in
vessels with positive ground and/or voltages other than 24 V may result in damage to the product and will void the warranty.
Dimensions | |
Height (H) | 2.05” / 52 mm |
Width (W) | 14.73” / 374 mm |
Depth (D) | 7.09” / 180 mm |
Model | M800/8-24V |
Frequency response | 12 Hz - 22 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping factor @ 4 Ω | >150 / 50 Hz |
Damping factor @ 2 Ω | >75 / 50 Hz |
THD+N @ Rated power | <1% @ 2 Ω per Ch. |
Input voltage range @ RCA inputs | Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) |
Min copper power / Ground wire gauge | 4 AWG wire |
Fuse rating | 40 A (AFS, AGU or MaxiFuse™) |
-
Physical Specification
Dimensions Height (H) 2.05” / 52 mm Width (W) 14.73” / 374 mm Depth (D) 7.09” / 180 mm
-
General Specification
Model M800/8-24V Frequency response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping factor @ 4 Ω >150 / 50 Hz Damping factor @ 2 Ω >75 / 50 Hz THD+N @ Rated power <1% @ 2 Ω per Ch. Input voltage range @ RCA inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min copper power / Ground wire gauge 4 AWG wire Fuse rating 40 A (AFS, AGU or MaxiFuse™)
Product Options
Product | OEM | EEPN | Availability | Price | Qty |
---|---|---|---|---|---|
JL98626
|
08.17.0157
|
AED 3,420.00
|
|