Scanstrut ATMOS In-Built Air Station 12V / 20 PSI / 1.37 BAR IPX6
Description
Scanstrut ATMOS 12V / 20 PSI / 1.37 BAR IPX6
Revolutionize your boating experience.
Our in-built air station is here to maximize quality time on the water. ATMOS, by Scanstrut, will revolutionize your family’s boating experience. This beautifully designed, in-built air station is here to maximize quality time on the water. At the push of a button, ATMOS is ready to inflate your paddleboards, towables and more: simply set the target pressure and let ATMOS do all the hard work. Utilizing Scanstrut’s outdoor technology DNA, this is waterproof on-board air that’s engineered to thrive in the harsh marine environment.
Innovative Two-Stage Pump
ATMOS with Brushless Technology - Unleash the power, efficiency, and reliability of our innovative two-stage pump system designed to meet the rugged demands of the marine environment. The first stage features a highly efficient fan motor, followed by a robust piston pump, both designed specifically for the rugged demands of the marine environment. ATMOS, combines both pumps into one waterproof, easy-to-use onboard air station, automatically switching at 1.1PSI from the HVLP to the HPLV pump.
Stage 1: High-volume, low-pressure (HVLP)
Designed to move large volumes of air with minimal pressure. They are typically used for inflating larger inflatable objects like kayaks, large tubes and bathing platforms as they can quickly inflate the object to the desired pressure.
Stage 2: High-pressure, low-volume (HPLV)
Designed to generate a high level of pressure with a low volume of air. Perfect for inflating smaller toys like SUPs, inflatable kayaks, and tubes that require a higher level of pressure for optimum performance.
Technical information | |
Waterproof rating | IPX6 waterproof front and back |
Input voltage | 12V Battery system (10-14V) |
Max Pressure output | 20 PSI / 1.37 BAR |
Max current draw | 12A (140W) |
Standby current draw | 0.02W Max |
Two-stage pump | Stage 1 = 0 -1 PSI |
Stage 2 = 1.1 - 20 PSI | |
Part Number | SC-AOB-A2 |
Ambient operating temp | -20º to +50 ºC |
Input voltage | 12V Battery system (11.5 – 14V) |
Max current draw | 12A (140W) |
Max pressure | 20 PSI / 1.37 BAR |
Max volume of airflow 0-1 PSI | 350 LPM/12.3 CFM |
Max volume of airflow 1-20 PSI | 70 LPM/2.5 CFM |
Standby power draw | 0.01W Max |
Two stage pump | Stage 1 = 0 - 1 PSI |
Stage 2 = 1.1 - 2 | |
Installation | |
How | Panel mounted using self-tapping screws or bolts (not included), foam gasket included. |
Installation angle | + 10º to - 30º from vertical |
Service | No end-user serviceable parts |
Where | Fit into a wide variety of locations on board: seating, side panels or consoles. Min cavity depth 110mm (4.33”) |
Ignition Protection - ISO 8846 and SAE J1171. | ATMOS SC-AOB-A2 has successfully undergone all required tests and complies with the rigorous standard for Ignition Protection. This certification signifies that ATMOS can be safely installed in any location on a boat or vehicle. |
Environment | |
Environmental protection | Conformal coated electronics and PCB |
Brushless Technology | Featuring high performance brushless motors designed for the marine environment. |
Protection | Reverse polarity, short-circuit, under voltage, overload, over temp. |
Certifications | CE, ROHS, UN ECE R10, UKCA |
Cable length | 500mm (20”) 1.5mm2 16 AWG |
Waterproof rating | IPX6 front and rear (door closed) |
Air flow | In and out of front of unit only. Rear of unit sealed |
Safety | |
Max run time | 25 minutes (3 SUPs) |
Under protection | Soft motor start |
Standby mode | No activity auto shut off - 5 mins |
Max pressure output | 20 PSI / 1.4 BAR |
Warranty | 2 Year warranty |
Auto shut-off | At target pressure |
Ambient operating temp | -20º to +50 ºC |
Ignition Protection | ATMOS SC-AOB-A2 meets the ISO 8846 and SAE J1171 test standard for Ignition Protection. |
-
Technical Specification
Technical information Waterproof rating IPX6 waterproof front and back Input voltage 12V Battery system (10-14V) Max Pressure output 20 PSI / 1.37 BAR Max current draw 12A (140W) Standby current draw 0.02W Max Two-stage pump Stage 1 = 0 -1 PSI Stage 2 = 1.1 - 20 PSI Part Number SC-AOB-A2 Ambient operating temp -20º to +50 ºC Input voltage 12V Battery system (11.5 – 14V) Max current draw 12A (140W) Max pressure 20 PSI / 1.37 BAR Max volume of airflow 0-1 PSI 350 LPM/12.3 CFM Max volume of airflow 1-20 PSI 70 LPM/2.5 CFM Standby power draw 0.01W Max Two stage pump Stage 1 = 0 - 1 PSI Stage 2 = 1.1 - 2 Installation How Panel mounted using self-tapping screws or bolts (not included), foam gasket included. Installation angle + 10º to - 30º from vertical Service No end-user serviceable parts Where Fit into a wide variety of locations on board: seating, side panels or consoles. Min cavity depth 110mm (4.33”) Ignition Protection - ISO 8846 and SAE J1171. ATMOS SC-AOB-A2 has successfully undergone all required tests and complies with the rigorous standard for Ignition Protection. This certification signifies that ATMOS can be safely installed in any location on a boat or vehicle. Environment Environmental protection Conformal coated electronics and PCB Brushless Technology Featuring high performance brushless motors designed for the marine environment. Protection Reverse polarity, short-circuit, under voltage, overload, over temp. Certifications CE, ROHS, UN ECE R10, UKCA Cable length 500mm (20”) 1.5mm2 16 AWG Waterproof rating IPX6 front and rear (door closed) Air flow In and out of front of unit only. Rear of unit sealed Safety Max run time 25 minutes (3 SUPs) Under protection Soft motor start Standby mode No activity auto shut off - 5 mins Max pressure output 20 PSI / 1.4 BAR Warranty 2 Year warranty Auto shut-off At target pressure Ambient operating temp -20º to +50 ºC Ignition Protection ATMOS SC-AOB-A2 meets the ISO 8846 and SAE J1171 test standard for Ignition Protection.