USD - US Dollar
Imtra Blade Power LED, 10-40VDC, White, Warm White, 4.7W, IP65
Description
Featuring 2-wire power & dimming, Blade easily replaces existing legacy (halogen) spots negating the need to run extra wires. Integrated drive electronics eliminates the need for remote driver installation. Carefully designed optics result in fully blended illumination free of annoying artifacts or distracting hot spots. A robust thermal management system results in maximum life with minimal lumens depreciation over its expected working life (50,000+ hrs). Blade offers single or bi-color dimming when paired with Imtra's single or dual channel PWM dimmer module. Blade features an ultra-flat round bezel in polished stainless or custom finishes. Blade conveniently & firmly installs with self-adjusting stainless steel springs. Made in the USA and covered by a 5-year warranty!
Features
- Ultra-flat stainless steel bezel design
- Convenient 2-wire power & dimming
- Bi-color dimming using single momentary switch (Bi-color models only)
- Integrated current controlled drive circuitry
- Convenient spring mounting (no screws needed)
| Name | Description |
| Housing Finish/Material | Black Electrophoretic Aluminum |
| Certifications & Compliance | CE-EMC, ROHS |
| Integrated Switch | No |
| Output Color | Warm White |
| Lifetime Hours | 50,000 hrs |
| Class | Class III |
| Dimmer Compatibility | ILIM80130, ILIM80140 |
| Dimmer Control Interface | Momentary Push-Button |
| Cut-out Dimensions | 2.65" (67mm) |
| Trim Ring (Bezel) Dimensions | 3.63" (92mm) dia |
| Trim Ring (Bezel) Finish/Material | Polished stainless steel |
| Halogen Equivalency | 25W |
| Input Voltage | 10-30VDC |
| Warranty | 5 Years / 1 Year Finish |
| Dimensions | See dimensional drawing |
| Power Consumption | 4.7W |
| Recessed Depth | 1.09" (28mm) |
| Lens Material | Frosted glass |
| Ingress Protection | IP65 (applies only to frontal water exposure, i.e. Exposed surface) |
| Dimming Range | 5-100% |
| Luminous Flux | 183 lms |
| Driver | Integrated |
| Install Location | Ceilings (interior) |
| Electrical Protections | Reverse Polarity, Transient & Spike Protection |
| Correlated Color Temperature (CCT) | 2800K (White LED) |
| Color Rendering Index (CRI) | 85 |
| Approximate Ship Weight (lbs) | 1 |
-
Technical Specification
Name Description Housing Finish/Material Black Electrophoretic Aluminum Certifications & Compliance CE-EMC, ROHS Integrated Switch No Output Color Warm White Lifetime Hours 50,000 hrs Class Class III Dimmer Compatibility ILIM80130, ILIM80140 Dimmer Control Interface Momentary Push-Button Cut-out Dimensions 2.65" (67mm) Trim Ring (Bezel) Dimensions 3.63" (92mm) dia Trim Ring (Bezel) Finish/Material Polished stainless steel Halogen Equivalency 25W Input Voltage 10-30VDC Warranty 5 Years / 1 Year Finish Dimensions See dimensional drawing Power Consumption 4.7W Recessed Depth 1.09" (28mm) Lens Material Frosted glass Ingress Protection IP65 (applies only to frontal water exposure, i.e. Exposed surface) Dimming Range 5-100% Luminous Flux 183 lms Driver Integrated Install Location Ceilings (interior) Electrical Protections Reverse Polarity, Transient & Spike Protection Correlated Color Temperature (CCT) 2800K (White LED) Color Rendering Index (CRI) 85 Approximate Ship Weight (lbs) 1
