Seahawk Anti-fouling Talon black 1 gallon
Description
Talon is a single season copper-based semi-hard hybrid antifouling paint from Sea Hawk Paints. Talon may be applied over most antifouling coatings and aggressively combats all types of marine fouling in fresh and saltwater.
Application controls
Method : Airless spray, conventional spray, solvent resistant rollers and brushes
Colors: Black-6045, Blue—6042 Blue, 6030-Dark Blue, 6041-Red, 6043-Green
Finish/Sheen: Semi-Gloss
Copper Content: 33.6% (all Colors)
Volume Solids: 56% ± 2%
Shipping Weight: Black - 15.53 Lbs/Gal (7.04 kg/Gal)
Flash Point: 100°F (38°C)
VOC: 398 Grams/Liter
Typical Film Thickness:
Pleasure Craft: 2.5 mils dry film thickness (DFT) per coat,(5.5 mils wet film thickness (WFT)
Commercial Marine: 3.0-5.0 mils DFT per coat by spray application (6.6– 11.0 Mils WFT)
Recommended Coats: 2 heavy coats on entire hull and 3 at waterline and other high wear areas
Theoretical Coverage: 291 Sq.Ft./Gal. @ 2.5 mils DFT
Application Controls:
Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes.
Dry Times and Overcoating Intervals:
Pleasure Craft Drying time in Hours
Substrate Temp. | Touch | Minimum | Maximum | Minimum Launch |
73°F (23°C) | 2 hours | 1 hour | Not Critical | 12 hrs |
95°F (35°C) | 1 hour | 1 hour | Not Critical | 12 hrs |
-
General Specification
Colors: Black-6045, Blue—6042 Blue, 6030-Dark Blue, 6041-Red, 6043-Green
Finish/Sheen: Semi-Gloss
Copper Content: 33.6% (all Colors)
Volume Solids: 56% ± 2%
Shipping Weight: Black - 15.53 Lbs/Gal (7.04 kg/Gal)
Flash Point: 100°F (38°C)
VOC: 398 Grams/Liter
Typical Film Thickness:
Pleasure Craft: 2.5 mils dry film thickness (DFT) per coat,(5.5 mils wet film thickness (WFT)
Commercial Marine: 3.0-5.0 mils DFT per coat by spray application (6.6– 11.0 Mils WFT)
Recommended Coats: 2 heavy coats on entire hull and 3 at waterline and other high wear areas
Theoretical Coverage: 291 Sq.Ft./Gal. @ 2.5 mils DFTApplication Controls:
Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes.Dry Times and Overcoating Intervals:
Pleasure Craft Drying time in HoursSubstrate Temp. Touch Minimum Maximum Minimum Launch 73°F (23°C) 2 hours 1 hour Not Critical 12 hrs 95°F (35°C) 1 hour 1 hour Not Critical 12 hrs
Product Options
Product | OEM | EEPN | Availability | Price | Qty |
---|---|---|---|---|---|
6045/GL
|
13.04.0029
|
AED 800.00
|
|
||
6042/GL
|
13.04.0030
|
AED 704.00
|
|