Jabsco Solenoid valve 12/24V suitable to be used with vented loops of 37010 series Jabsco toilets

Solenoid valve 12/24V
37068-2000

Where 37010 series electric toilets are installed below the waterline Jabsco recommends installing a loop on the inlet plumbing rising at least 8” (20 cm) above the highest (static or heeled) waterline level, and installing a vented loop fitting at the top of the loop to stop water siphon over the loop and flooding the vessel. 
The suction generated by 37010 series electric toilets will open the valve in vented loops, drawing in air and preventing priming. 
The 04.02.0007 solenoid valve attaches directly to Jabsco vented loops and is wired to the toilet’s on/off switch. It closes whenever the toilet pump is operated and ensures full pump priming.

Packaged Dimensions: L:8.00 x H:7.00 x W:8.00cm
Actual Weight: 0.16 Kg  (Approx. 0.36 Kg packed)