Epifanes Woodfinish matte 500ml
Description
A clear satin finish for use over Epifanes woodfinish gloss (one-component). Provides a beautiful, satin sheen for interior use.
Thinner : Brush application - Epifanes brush thinner for paint & varnish.
Spray application - Epifanes spray thinner for paint & varnish.
Recoatable : After 24 hours at 18°C (65°F.)
Coverage : One liter is sufficient for 12 m² (130 ft²)
Coats | First | Second |
Product | Epifanes Woodfinish Matte | Epifanes Woodfinish Matte |
Thinner | Brush Thinner P&V | Brush Thinner P&V |
Thinning Ratio % | 0-5 | 0-5 |
Drying Time hrs | 12 at 65F/18C | 12 at 65F/18C |
Abrasive paper grit | 320 - 400 | 400 |
Abrasive type | Wet or Dry | Wet or dry |
Coverage/liter | 140 sq. feet | 140 sq. feet |
Remarks | Always stir | If recoated within 72 hours sanding is not required. |
Maintenance:
If existing coats of varnish are intact, one or more coats of Epifanes Woodfinish Matte may be applied on a well cleaned, degreased and lightly sanded surface.
An existing varnish system in poor condition must be removed. Weathered spots may be treated with a cleaning or bleaching product.
If either are used, wash down the surface thoroughly with fresh water in order to remove any residue. Allow the surface to dry.
Smaller spots needing repair may be filled with several coats of Woodfinish Gloss or Clear Gloss Varnish.
When an equal level has been achieved, sand to a smooth surface and apply one or more coats of Woodfinish Matte on the entire surface.
-
General Specification
Coats First Second Product Epifanes Woodfinish Matte Epifanes Woodfinish Matte Thinner Brush Thinner P&V Brush Thinner P&V Thinning Ratio % 0-5 0-5 Drying Time hrs 12 at 65F/18C 12 at 65F/18C Abrasive paper grit 320 - 400 400 Abrasive type Wet or Dry Wet or dry Coverage/liter 140 sq. feet 140 sq. feet Remarks Always stir If recoated within 72 hours sanding is not required. Maintenance:
If existing coats of varnish are intact, one or more coats of Epifanes Woodfinish Matte may be applied on a well cleaned, degreased and lightly sanded surface.
An existing varnish system in poor condition must be removed. Weathered spots may be treated with a cleaning or bleaching product.
If either are used, wash down the surface thoroughly with fresh water in order to remove any residue. Allow the surface to dry.
Smaller spots needing repair may be filled with several coats of Woodfinish Gloss or Clear Gloss Varnish.
When an equal level has been achieved, sand to a smooth surface and apply one or more coats of Woodfinish Matte on the entire surface.
Product Options
Product | OEM | EEPN | Availability | Price | Qty |
---|---|---|---|---|---|
WFM.500
|
13.02.0019
|
AED 90.00
|
|
||
WFM.1
|
13.02.0020
|
AED 169.00
|
|