Epifanes Varnish Clear Gloss Poly-urethane 500 + 250gm 2 Components
Description
A high gloss, two-component, polyester saturated, aliphatic urethane finish with excellent outdoor durability. Contains a UV-filter. To be used on intact existing poly-urethane varnish systems, as a complete varnish system on bare dimensionally stable wood (i.e. marine plywood), as a build-up coat prior to a onecomponent varnish system, as a protective coat on epoxy resins or as an intermediate coat on epoxy resins when a one-component finish is desired. Suitable for fresh and salt water, for interior and exterior use. Mixing ratio is 2 parts component A to one part component B by weight. Each can of base is partially full. Pour the reactor (B) into the can of base (A) and stir thoroughly. Allow to activate for 20-30 minutes before use. Potlife after mixing 3-4 hours at 20°C (70° F.) Temperature should be between 15°C and 27°C (60°- 80°F.) during application.
Thinner : Brush/ roller application - Epifanes poly-urethane brushthinner.
Spray application - Epifanes poly-urethane spraythinner.
Recoatable : After 24 hours at 18°C (65°F.).
Coverage : 750 g is sufficient for 9 m² (96 ft²).
Coats | First | Second | Third | At least 3 more |
Product | Epifanes PUCG | Epifanes PUCG | Epifanes PUCG | Epifanes PUCG |
Thinner | Brush Thinner For Polyurethane | Brush Thinner For Polyurethane | Brush Thinner For Polyurethane | Brush Thinner For Polyurethane |
Thinning Ratio % | 15-Oct | 15-Oct | 0-10 | 0-5 |
Drying Time in hrs | 24 at 65F./18C | 24 at 65F./18C | 24 at 65F./18C | 24 at 65F./18C |
Abrasive paper grit | 220 | 280 | 320 | 320-400 |
Abrasive type | Dry | Dry | Dry | Wet or dry |
Coverage/liter | 130 sq. feet | 130 sq. feet | 130 sq. feet | 130 sq. feet |
Remarks | If recoated within 48 hours, sanding is not required. |
Maintenance:
If existing coats of varnish are intact, one or more coats may be applied on a well cleaned, degreased and lightly sanded surface.
Alternatively, the last two coats of Epifanes Polyurethane Clear Gloss Varnish may be replaced with two coats of Epifanes Clear Gloss Varnish.
Allow 24 hours between coats and sand with 320-400 grit wet or dry abrasive paper. The one-component finish may be preferred if a more elastic topcoat is desired or required.
The one-component finish also provides easier maintenance.
-
General Specification
Coats First Second Third At least 3 more Product Epifanes PUCG Epifanes PUCG Epifanes PUCG Epifanes PUCG Thinner Brush Thinner For Polyurethane Brush Thinner For Polyurethane Brush Thinner For Polyurethane Brush Thinner For Polyurethane Thinning Ratio % 15-Oct 15-Oct 0-10 0-5 Drying Time in hrs 24 at 65F./18C 24 at 65F./18C 24 at 65F./18C 24 at 65F./18C Abrasive paper grit 220 280 320 320-400 Abrasive type Dry Dry Dry Wet or dry Coverage/liter 130 sq. feet 130 sq. feet 130 sq. feet 130 sq. feet Remarks If recoated within 48 hours, sanding is not required. Maintenance:
If existing coats of varnish are intact, one or more coats may be applied on a well cleaned, degreased and lightly sanded surface.
Alternatively, the last two coats of Epifanes Polyurethane Clear Gloss Varnish may be replaced with two coats of Epifanes Clear Gloss Varnish.
Allow 24 hours between coats and sand with 320-400 grit wet or dry abrasive paper. The one-component finish may be preferred if a more elastic topcoat is desired or required.
The one-component finish also provides easier maintenance.