Vetus Thruster bow hydraulic 95 kgf includes hydro motor 60kW tunnel dia.185mm IP65
Description
BOW-THRUSTER 95KGF
The BOW95HMD hydraulic thruster may be fitted to Ø185 mm GRP, steel or aluminium tunnels or used as stern thruster. Offers virtually unlimited running time.
This model hydraulic bow thruster in the VETUS range, featuring as standard a hydraulic motor. The hydraulic motor is driven by a hydraulic pump.
If a hydraulic pump and associated tank are already installed on board, then, in most cases, this assembly can be used for driving the bow thruster too. Some marine engine manufacturers, e.g. VETUS DEUTZ, supply as standard a special PTO (Power Take Off) connection, which greatly simplifies the installation of the hydraulic pump. In addition to the pump and the hydraulic storage tank, VETUS can also supply the required load sensing and control devices, as well as the high-pressure hydraulic hoses, complete with end fittings. The hydraulic bow thruster may be fitted to GRP, steel or aluminium tunnels or used as a stern thruster using the appropriate installation kit.
EE Part number | 06.08.0012 |
Model | BOW95HMD |
THRUST (N / KGF) | 950 (95) |
HYDRAULIC MOTOR POWER (KW) | 6 |
HYDRAULIC MOTOR CAPACITY (CM³/REV) | 4.2 |
FLOW RATE (LITRES/MINUTE) | 24 |
OPERATING PRESSURE (BAR) | 230 |
DIAMETER A (MM) | 200 |
LENGTH B (MM) | 276 |
DIAMETER C (MM) | 185 |
-
Physical Specification
EE Part number 06.08.0012 Model BOW95HMD THRUST (N / KGF) 950 (95) HYDRAULIC MOTOR POWER (KW) 6 HYDRAULIC MOTOR CAPACITY (CM³/REV) 4.2 FLOW RATE (LITRES/MINUTE) 24 OPERATING PRESSURE (BAR) 230 DIAMETER A (MM) 200 LENGTH B (MM) 276 DIAMETER C (MM) 185
Product Options
Product | OEM | EEPN | Availability | Price | Qty |
---|---|---|---|---|---|
BOW55HMD
|
06.08.0011
|
AED 8,098.00
|
|
||
BOW95HMD
|
06.08.0012
|
AED 10,063.00
|
|
||
BOW160HMD
|
06.08.0013
|
AED 13,500.00
|
|
||
BOW230HMD
|
06.08.0014
|
AED 18,411.00
|
|
||
BOW310HMD
|
06.08.0015
|
AED 19,885.00
|
|