Vetus Tank waste water 25L plastic with connections and inspection lid (excludes inlet fitting)

Waste water tank
BTANK25C
Plastic tank for temporary onboard storage of black and grey waste water. Supplied with inspection cover and connections for breather and outlet hoses.

It is supplied with the following connections: Fixed hose connector Ø 19 mm for the breather line.
Rotating hose connector Ø 38 mm with pick-up pipe, for waste water suction. A Ø 42 mm hole is provided for easy installation of an inlet fitting, type RT..B.
This should be ordered separately according to the inlet hose diameter. If required, additional inlet fittings may also be installed. The BTANK25C comes complete with a pre-fitted inspection lid and is made in accordance with ISO 8099 standards.
The VETUS waste water tank is made from high-grade linear polythene and is designed to be odour free when used for the temporary storage of organic waste materials (suited for both “black“ and ”grey” water).
The centre point for a SAE flange gauge sender is incorporated in the moulding together with 5 blind bolt holes.
The relevant gauge sender should be ordered separately and the appropriate hole cut in the tank. Further extras include a discharge pump and the WWCP waste management panel.