Epifanes

Epifanes Rapidcoat 750 ml

OEM # RC.750
On Request
EEPN
13.02.0021
Secure Payments
Genuine Products
Easy Returns
Fast Delivery
AED 119.00
- +

FREE DELIVERY ACROSS THE UAE ON ALL ORDERS ABOVE AED 500

Epifanes

Rapidcoat 750 ml

Description

A quick and easy alternative to conventional varnish based on a modified alkyd/urethane resin combined with colourfast pigments for interior and exterior use. Provides a lightly tinted UV protecting finish. It bonds extremely well to teak and other oily woods, preventing discolouration and emphasizes the natural grain of the wood. No sanding between coats, excellent water resistance, great breathing properties and flexibility. An excellent protection in all climates. To be used for renewing weathered areas, as a stain prior to a varnish system or as a full system for those requiring the absolute best in a quick and easy satin finish with maximum durability, UV protection and longevity. Apply by brush, foam brush, roller or spray 3 to 4 coats. Stir well prior to use, do not thin and allow 5-6 hours between coats. Sanding between coats is not required. If topcoated with varnish, sand with 220 grit dry abrasive paper.

Thinner : Do not thin.
Recoatable : After 5-6 hours at 18°C (65°F.)
Coverage : 750ml is sufficient for 10-16 m² (107-172 ft²) depending on substrate.

Coats First Second Third Fourth (optional)
Product Epifanes Rapidcoat Epifanes Rapidcoat Epifanes Rapidcoat Epifanes Rapidcoat
Thinner N/A N/A N/A N/A
Thinning Ratio % N/A N/A N/A N/A
Drying Time hrs 5-6 at 65F./18C 5-6 at 65F./18C 5-6 at 65F./18C 5-6 at 65F./18C
Abrasive paper grit N/A N/A N/A N/A
Abrasive type N/A N/A N/A N/A
Coverage /liter 150 sq. feet 150 sq. feet 150 sq. feet 150 sq. feet
Remarks If using as a stain prior to varnish, apply, leave for a few minutes and rub out with a clean rag.

 

Maintenance:
If existing coats of Rapidcoat are intact, one or more coats may be applied on a well cleaned, and degreased surface. 
For annual maintenance, apply a minimum of one or two coats of Epifanes Rapidcoat. The number of maintenance coats needed depends on the condition of the Rapidcoat system. 
The weather and atmospheric conditions to which the finish is subjected will determine the amount of time between maintenance coats. 
Bare or weathered areas may be treated with a cleaning or bleaching product. If either are used, wash down the surface thoroughly with fresh water in order to remove any residue. 
Allow the surface to dry. Sand and apply three coats of Rapidcoat as per instructions.

  • General Specification

    Coats First Second Third Fourth (optional)
    Product Epifanes Rapidcoat Epifanes Rapidcoat Epifanes Rapidcoat Epifanes Rapidcoat
    Thinner N/A N/A N/A N/A
    Thinning Ratio % N/A N/A N/A N/A
    Drying Time hrs 5-6 at 65F./18C 5-6 at 65F./18C 5-6 at 65F./18C 5-6 at 65F./18C
    Abrasive paper grit N/A N/A N/A N/A
    Abrasive type N/A N/A N/A N/A
    Coverage /liter 150 sq. feet 150 sq. feet 150 sq. feet 150 sq. feet
    Remarks If using as a stain prior to varnish, apply, leave for a few minutes and rub out with a clean rag.

     

    Maintenance:
    If existing coats of Rapidcoat are intact, one or more coats may be applied on a well cleaned, and degreased surface. 
    For annual maintenance, apply a minimum of one or two coats of Epifanes Rapidcoat. The number of maintenance coats needed depends on the condition of the Rapidcoat system. 
    The weather and atmospheric conditions to which the finish is subjected will determine the amount of time between maintenance coats. 
    Bare or weathered areas may be treated with a cleaning or bleaching product. If either are used, wash down the surface thoroughly with fresh water in order to remove any residue. 
    Allow the surface to dry. Sand and apply three coats of Rapidcoat as per instructions.


Write Your Own Review
You're reviewing:Rapidcoat 750 ml
You May Also Like