3M Polishing pad Blue 216 mm double sided high gloss convoluted foam for Perfect-it III quick connect system (Until Stock Lasts)

3M™ Perfect-It™ Ultrafine Polishing Pad, Quick Connect System, Blue, Convoluted, 216 mm, 
PN50708, 3M ID UU006385213
Material: Foam
Diameter: 216mm

Our 3M™ Perfect-It™ Ultrafine Polishing Pad helps to eliminate swirl marks on painted surfaces, even on difficult dark colored cars. Featuring a unique waffle face design that holds liquid polish, this pad applies polish evenly without releasing excess polish that may cause ripples in the finish.

High Quality Polishing Our 3M™ Perfect-It™ Ultrafine Polishing Pad is essential for getting the very finest polish on painted surfaces. The high quality foam material softly applies an even layer of polish while the waffle face design holds polish well during use and helps to eliminate swirl marks. This pad is manufactured with our 3M™ Hookit™ attachment system for quick pad attachment and removal and to hold the pad securely in place during use. Hookit™ buffing pads firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the pad. Finish results are dependent on the combination of coating type, polish, and tools used. Heat Resistant We designed the 3M™ Perfect-It™ Ultrafine Polishing Pad to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They normally operate at higher RPMs than wool pads also, relying on a combination of cutting and heat buildup to slightly melt the surface coating and remove fine scratches, swirl marks, and surface marring. Foam pads range in abrasive levels determined by its softness and the cell size of the holes; the larger the hole, the more aggressive the pad. "Closed cell" pads are the least aggressive type. Foam buffing pads are used in conjunction with polishes and are suitable to use with rotary and random orbital tools. Perfect-it™ Polishing System 3M™ Perfect-It™ system was created to produce show-room grade finishes with deep color and rich gloss. The system uses a progressive series of abrasives, buffing pads, and proprietary polishes across four stages of repair. The stages consist of sanding, scratch refinement, compounding, machine polishing, and swirl elimination. The level of work and stages needed for paint repair depend on the severity of the paint imperfection and Perfect-It™ provides an effective solution for any level of clear coat and paint repair. 3M™ Trizact™ abrasives, along with compound and polish formulations that are unique to 3M, provide increased shop productivity while helping to deliver the best-looking vehicle possible. 3M offers almost 700 aftermarket products, covering every stage of the auto refinishing process. The commitment to continual product development ensures a stream of innovative solutions resulting in quicker job throughout, consistent quality results and reduced costs.

Provides soft, smooth surface for applying 3M™ Perfect-it™ polishes
Used to help eliminate swirl marks and apply high gloss finishes
Waffle face provides sufficient contact surface while holding polish well
Inset design allows the use of 3M™ Hookit™ back up pads without adding bulk
Available in 8 inch and 3 inch sizes