Dan Fender Mooring Buoy PEM40SH-R Foam Filled Short Rod Red Dia. 320 mm
Description
In principle intended for the same use as ordinary, inflatable mooring buoys, but in stead of being made of soft PVC, this is a buoy of hard polyethylene, which has subsequently been filled with PUR foam. Consequently, it cannot immediately sink. Remember to use the lower eye when you moor your boat to a mooring buoy. Thus the boat will always keep in contact with the anchor. The upper eye is only intended for lift of buoy and double safeguarding. Do not use stainless steel together with galvanized iron, as it will start a galvanic corrosion, causing very quick breakdown / rusting through of the lower eye and the chain.
Short rod | |||||||
Part number (White) | Part number (Red) | Type | Ø (mm) | L* (mm) | Buoyancy (kg) | Rod Ø (mm) | Circumference (mm) |
14.02.0078 | 14.02.0079 | PEM40SH | 320 | 360 | 17 | 12 | 1015 |
14.02.0080 | 14.02.0081 | PEM50SH | 405 | 460 | 34 | 16 | 1270 |
14.02.0082 | 14.02.0083 | PEM60SH | 480 | 500 | 61 | 16 | 1525 |
14.02.0084 | 14.02.0085 | PEM60SH | 480 | 500 | 61 | 16 | 1905 |
Long rod | |||||||
14.02.0086 | 14.02.0087 | PE M40L | 320 | 360 | 17 | 12 | 1015 |
14.02.0088 | 14.02.0089 | PE M50L | 405 | 460 | 34 | 16 | 1270 |
14.02.0090 | 14.02.0091 | PE M60L | 480 | 500 | 61 | 16 | 1525 |
14.02.0092 | 14.02.0093 | PE M75L | 605 | 660 | 120 | 16 | 1905 |
* Length measured without rod. Made of hard polyethylene. Non inflatable, foam filled. All rods are warm-galvanized and rilsan treated. Secured with self locking nut.
-
General Specification
Short rod Part number (White) Part number (Red) Type Ø (mm) L* (mm) Buoyancy (kg) Rod Ø (mm) Circumference (mm) 14.02.0078 14.02.0079 PEM40SH 320 360 17 12 1015 14.02.0080 14.02.0081 PEM50SH 405 460 34 16 1270 14.02.0082 14.02.0083 PEM60SH 480 500 61 16 1525 14.02.0084 14.02.0085 PEM60SH 480 500 61 16 1905 Long rod 14.02.0086 14.02.0087 PE M40L 320 360 17 12 1015 14.02.0088 14.02.0089 PE M50L 405 460 34 16 1270 14.02.0090 14.02.0091 PE M60L 480 500 61 16 1525 14.02.0092 14.02.0093 PE M75L 605 660 120 16 1905 * Length measured without rod. Made of hard polyethylene. Non inflatable, foam filled. All rods are warm-galvanized and rilsan treated. Secured with self locking nut.
Product Options
Product | OEM | EEPN | Availability | Price | Qty |
---|---|---|---|---|---|
PEM40SH-W
|
14.02.0078
|
AED 440.00
|
|
||
PEM40SH-R
|
14.02.0079
|
AED 440.00
|
|
||
PEM50SH-W
|
14.02.0080
|
AED 690.00
|
|
||
PEM50SH-R
|
14.02.0081
|
AED 690.00
|
|
||
PEM60SH-W
|
14.02.0082
|
AED 913.00
|
|
||
PEM60SH-R
|
14.02.0083
|
AED 913.00
|
|
||
PEM75SH-W
|
14.02.0084
|
AED 1,212.00
|
|
||
PEM75SH-R
|
14.02.0085
|
AED 1,212.00
|
|