Tru Design Hose connector 90 deg. Black long 3/4" x 19 mm Male BSP GRP

Tail 19mm ¾” BSP Long Thread 90° bend, black

Designed and made in New Zealand, TruDesign Long Thread Tails are the superior composite connection for fitting hoses to threaded fittings.
TruDesign Tails are moulded from a glass reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional stability. TruDesign
Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. The Tails are designed for twin hose clamps, and to not crush under high load conditions.

- Manufactured from a glass reinforced nylon composite: High strength and light weight.
- Immune to corrosion and electrolysis: Long life with no concerns over decreased performance due to corrosion.
- Chemical resistant: Impervious to diesel, petrol and antifouling paints.
- UV resistant: These fittings will not break down with ultraviolet light or discolour from the sun.
- High quality surface finish: Will not discolour with green film as similar bronze fittings do.
- Fits TruDesign Ball Valves, BSP and NPS threads.
- Universal compatibility to other TruDesign fittings, and other marine components.
- Large operating temperature range Suitable for all marine environments, from -40°C to +110°C.

Do not over tighten, simply allow the adhesive sealant to provide the seal. To achieve the correct orientation simply screw the fitting all the way home then “back it off” to the correct orientation to suit hose direction. 
Adhesive sealants best provide both the mechanical strength and sealing.
Apply twin hose clamps for a secure hose connection and check tightness regularly.