BEP CZone motor output interface + connector & protective boot

The Motor Output Interface (MOI) has an output pair for controlling dc motors which require a reversal of polarity to change the direction of their mechanical operation. For example, a dc motor for an electric window mechanism will move the window up or down depending on the polarity of the feed to the motor. Historically the wiring and control circuitry for such installations is complicated and requires a number of individual components. Often controls for these devices are mounted remotely to the motor so wiring runs can be long. The MOI replaces all of these devices with one simple solution  that can be mounted close to the motor further reducing cable runs. The MOI can be configured to deliver a “Soft start” so that motor driven devices don’t start with a sudden and abrupt motion. The MOI also incorporates two standard output channels such as is found on the OI.

• Single motor control and two normal channels per unit, 20A per output
• Built In circuit protection
• IPX5 water ingress protection
• Dimensions (W x H x D): 7-29⁄32”x5”x1-¾” 200 x 128 x 45 mm