Exalto Emirates LLC.

0 Items

Products added to your cart

0 Items

You have no items in your shopping cart.

Blue Guard

Blue Guard

Blue Guard Innovations, LLC (BGI) is formed from over 50 years of combined experience, innovation, dedication, and excellence in introducing innovative products to global markets. Company headquarters and R&D team are located in Boulder, CO, with manufacturing operations in San Diego, CA. Company’s entry into the maritime sensor development was done so with collaboration from the commercial maritime community. In creating their team, they brought in expertise from the marine industry world with extensive experience in commercial vessel operations. Combining experience and technology they now produce cutting edge sensor systems to protect their mariners, vessels, and environment.

Blue Guard Innovations, LLC has developed a patented oil and fuel detection sensor. This sensor is unique in the market due to its reliability of detection, small size, and affordability. BGI has introduced new products for boat and ship bilge pump control. The BG-One (Oil and Fuel Detector with Smart Bilge Pump Switch) turns the bilge pump off when oil or fuel is detected, preventing contamination of our harbors, bays, lakes, seas, and waterways while, at the same time, saving thousands of dollars in fines to boat owners and operators.



  • The BG-SWA (Solid-State Bilge Pump Switch with High Water Alarm) is a highly reliable bilge pump switch that is the ideal replacement for unreliable mechanical float switches with an integrated high-water alarm. The BG-SWA uses two integrated sensors to detect liquid in the bilge while reliably activating the bilge pump. Having no moving parts that can be jammed or damaged, the solid-state BG-SWA is built to outlast all the mechanical float switches on the market today while alerting you of water presence in your bilge. The BG-SWA is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Patented technology. The BG-SWA will activate the bilge pump when water or any liquid is detected. The BG-SWA triggers the high-water alarm when water is detected continuously for 3 seconds after the first detection (factory default setting) indicating that the bilge pump is either overwhelmed with excessive rising water or not working. Based upon bilge and pump size, the user can configure the alarm activation delay from 3-10 seconds. The BG-CP is recommended to display and sound the alarm. Users can use their existing panel with equivalent functions. The alarm output of the BGSWA is a 12 or 24 Vdc with 1-amp max drive. The BG-SWA can be tested and its status can be viewed using the BGI Config App, which can be downloaded from the App Store or Google Play. The App is used on a mobile device with Bluetooth to wirelessly connect to the BG-SWA device. The App will report the input voltage level and system temperature. It also allows changing the name of the device for easy identification and testing the device. Set the pump run time after water detection via the BGI Config App. The high-water alarm timing can be configured via the BGI Config App. The configurable range is 3-10 seconds. The BG-SWA also offers programmable splash protection, which can be used in rough waters or foul weather conditions to prevent false pump activation which can result in the pump running dry. Splash protection modes include High (2 seconds, factory default setting), Medium (3 seconds), Low (5 seconds), and OFF.

     AED 936.00
  • The BG-SW (Solid-State Bilge Pump Switch) is a highly reliable bilge pump switch, with no moving parts, that is the ideal replacement for unreliable mechanical float switches. The BG-SW uses two integrated sensors to detect liquid in the bilge while reliably activating the bilge pump. Having no moving parts that can be jammed or damaged, the solid-state BG-SW is built to outlast all the mechanical float switches on the market today. The BG-SW is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Patented technology. The BG-SW will turn the bilge pump ON when water or any liquid is detected and turn OFF when no water or liquid is detected. The BG-SW extends the life of the bilge pump due to its ability to significantly reduce current spikes during the activation of the pump. The BG-SW can be tested and its status can be viewed using the BGI Config App, which can be downloaded from the App Store or Google Play. The App is used on a mobile device with Bluetooth to wirelessly connect to the BG-SW device. The App will report the input voltage level and system temperature. It also allows changing the name of the device for easy identification and testing the device. Set the pump run time after water detection via the BGI Config App.

     AED 835.00
  • The BG-One (Oil and Fuel Detector with Smart Bilge Pump Switch) integrates with the bilge pump system to selectively pump out water and not oil or fuel, preventing the vessel from accumulating water and aiding in the prevention of costly oil or fuel spills. The BG-One was developed in collaboration with the marine industry needing a reliable, long lasting bilge pump switch. Having no moving parts or float switches that can easily be damaged, the BG-One will automatically turn off the bilge pump when oil or fuel is detected before a costly spill occurs. The BG-One will connect to any 12 or 24 Vdc bilge pump and alarm panel on the market today. The BG-One is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Patented technology. With precise oil and fuel detection accuracy down to 1 mm (0.04”), the BG-One minimizes the boat owners’ liability for costly cleanup and possible fines; all while extending the life and reliability of the bilge pump through selective pumping. When the sensor is configured in its factory default mode, Mode A (Marina), the pump will turn ON when water is detected and turn OFF when oil or fuel is detected. The pump will turn back ON when only water is detected. In Mode B (Marine Sanctuary) the pump will turn ON when water is detected and turn OFF when oil or fuel is detected. The pump will remain OFF until the alarm and bilge are cleared (requires power cycling of device). In Standard Mode (High Seas) the pump will turn ON when any liquid is detected and turn OFF when there is no liquid detected. Set low, medium, or high oil detection sensitivity via the BGI Config App. Set the pump run time after water and oil detection via the BGI Config App.

     AED 1,108.00
  • The USCG 46 CFR 28.250 & 182.530 compliant BG-HW (High Water Sensor) detects salt or fresh water and can be easily integrated into any vessel’s alarm system. Water in any compartment of a vessel is a potential crisis. Early warnings of water entering the hull or leaking from plumbing is extremely important for the safety of the vessel and passengers. The BG-HW is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Patented technology. The BG-HW triggers an alarm when high water is detected, once connected to a BG-CP (Control Panel) or any alarm system. The BG-HW has a 12 or 24 Vdc with 1-amp max alarm output.

     AED 784.00
  • The BG-Oil (Oil and Fuel Detector) senses the presence of oil and can be easily integrated into any vessel’s alarm system. Compartments on a vessel or even in a landside space are often in close proximity to tanks and machinery where oil and fuel leaks can potentially occur. Installing the BG-Oil will provide an early warning for spills in these environments. The BG-Oil is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Patented technology. With precise oil and fuel detection accuracy down to 1 mm (0.04”), the BG-Oil triggers an alarm when oil or fuel is detected, once connected to a BG-CP (Control Panel) or any alarm system. The alarm output sources up to 1 amp, making it capable of driving user relays and actuators. When the sensor is configured in its factory default mode, Standard Alarm Mode, the alarm will turn ON when oil is detected and OFF when oil is no longer detected. In Latch Alarm Mode the alarm stays ON when oil is detected, until manual reset or power cycling of the devices. Set low, medium, or high oil detection sensitivity via the BGI Config App.

     AED 886.00
  • The BG-SPKit-A (Pump Mount) / BG-SPKit-B (Pipe Mount) is a highly reliable solid-state sump pump switch and sensor, making it the ideal replacement for unreliable mechanical float switches. The BGSPKit- A / BG-SPKit-B includes a BG-SP (Sump Pump Sensor), an AC Power Switch, a pump (BG-SPKit-A)  or a pipe (BG-SPKit-B) mounting bracket, and an AC/DC Power Supply. The BG-SP uses two integrated sensors to detect liquid in the sump while reliably activating the sump pump through the AC PowerSwitch. Having no moving parts that can be jammed or damaged, the solid-state BG-SP is built to outlast all the mechanical float switches on the market today. The BG-SP is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Patented technology. The BG-SPKit-A / BG-SPKit-B will turn the sump pump ON when liquid is detected in the sump and turn OFF when no water or liquid is detected. The BG-SPKit-A / BG-SPKit-B extends the life of the sump pump due to its ability to significantly reduce current spikes during the activation of the pump. The BG-SPKit-A / BG-SPKit-B can be tested and its status can be viewed using the BGI Config App, which can be downloaded from the App Store or Google Play. The App is used on a mobile device with Bluetooth to wirelessly connect to the BG-SP device. The App will report the input voltage level and system temperature. It also allows changing the name of the device for easy identification and testing the device. Set the pump run time after water detection via the BGI Config App (15-60 seconds).

    (2 items) from AED 658.00
  • The BG-Link IoT Marine Gateway is a unique wireless monitoring system which primarily focuses on monitoring and alerting vital boat functions such as battery power systems and bilge functions through direct access to the internet cloud. Keeping the boat owner or designated user informed with 24/7 information about events taking place in the vessel’s bilge system. Regardless of the size of the vessel, it is easy to configure boat configuration including the name of the marina, dock and slip location to naming individual bilge, battery bank, down to all devices that are monitoring.

    (2 items) from AED 4,529.00
  • BG-Link Configuration

    (3 items) from AED 633.00
  • The BG-CP (Control Panel) is an important and convenient way to display and monitor bilge pump functions at the bridge of the vessel. All the essential functions of alarms and controls are at the crew’s fingertips. The control panel displays oil and high-water detection LEDs with an accompanying 97 dBA sound output audio alarm. The BG-CP includes an easy to read bilge pump counter with a reset button and fuse holder located on the front panel. The illuminated three position pump switch has an OFF, Auto, and Manual override function.  

     AED 1,139.00
  • The BG-CP-E (Control Panel Mounted in Enclosure) is an important and convenient way to display and monitor bilge pump functions. All the essential functions of alarms and controls are at the crew’s fingertips. The control panel displays oil and high-water detection LEDs with an accompanying 97 dBA sound output audio alarm. The BG-CP-E includes an easy to read bilge pump counter with a reset button and fuse holder located on the front panel. The illuminated three position pump switch has an OFF, Auto, and Manual override function.

     AED 1,493.00
  • The BG-JBox (Junction Box) is a splash proof interconnect junction featuring a transparent cover and LED indicators showing active connections. It is capable of handling 20-amp power connections and designed to keep all interconnected wires dry and reliable. It is a simple interconnector between the BGOne or BG-Oil, BG-HW, BG-CP, and bilge pump

     AED 557.00
  • The Pump Mounting Bracket allows Blue Guard sensors to be mounted directly onto bilge pumps for easy installation. The Pump Mounting Bracket comes in two different size ranges.

    (2 items) from AED 137.00

Close

Share this page

Dear Friend,

Check out this awesome new product from Exalto Emirates!

Page: Blue Guard
Share to
Your detail
Close

Specifications

Specifications

Close