Exalto Emirates LLC.

0 Items

Products added to your cart

0 Items

You have no items in your shopping cart.

Wood Care


  • Clean up grungy teak and make it shine with this easy-to-use two-step product.An easy and affordable way to recondition teak, this two-step system removes mildew stains, fuel, fish blood and many other hard to remove stains without the hassle and expense of sanding.

    (2 items) from AED 164.00
  • Step two of an easy two-step system for cleaning and brightening teak.An easy and affordable way to recondition teak, this two-step system removes mildew stains, fuel, fish blood and many other hard to remove stains without the hassle and expense of sanding. Gallon size of Neutralizer, part two of two-step cleaning. Step one of the Snappy Teak cleaning process see our Model Number 12599791.  

    (2 items) from AED 164.00
  • 2 part cleaning system is the easy and affordable way to recondition teak.2 step process removes old sealers, soil, mildew, fuel, fish blood and many other hard to remove stains without the hassle and expense of sanding. Quart Kit contains one quart each of formula 1 and 2, plus two plastic bristle scrub brushes

     AED 138.00
  • One-step application to preserves timber in a natural look. Suitable for use on teak furniture and decks, including marine timber. It is a water based, biodegrable teak cleaner that super cleans teak, any form of timber, outdoor furniture, decks & especially marine timber. It draws the contaminates out of the timber & simply washes off with water. Also suitable for spot cleaning of any unexpected spillages. It not only super cleans but it helps treat & preserve the timber. An oil can be used over the top to give a wet look or change in colour. Simple usage of product: Pour the product into a bucket, use straight (do not add water). Dampen the area. Then use a clean medium to strong bristle brush, apply the product and agitate until all contaminates are removed from timber. Finally simply rinse thoroughly with water using a hose & leave to dry naturally & if necessary you may spot clean any areas missed by repeating the above.

    (3 items) from AED 88.00
  • Teak deck sealer will add a protective coating to your teak deck and protect it from the wear and tear from salt water, wash and weather. Teak deck sealer will add a protective coating to your teak and preserve the teak colour for a long period of time. When washing a teak deck treated with teak deck sealer, you will be washing the surface of the sealer instead of wearing the timber. Use only a thin layer of teak deck sealer, as the deck might otherwise become slippery.

    (2 items) from AED 33.00
  • Top Gear teak deck wash cleans teak decks with no harmful chemicals. The wash is gentle, non-caustic and it’s even biodegradable. When used egularly it will kill mould, algae and remove most timber contamination.

    (3 items) from AED 28.00
  • Top Gear teak deck brightener is a neutralizer and brightener to be used only after the deck has been thoroughly washed. Teak deck brightener will brighten and restore the natural teak timber colour and enhance the overall look of your vessel.

    (3 items) from AED 28.00
  • An impregnating oil, based on linseed oil and alkyd resin. Protects teakwood from discolouration caused by weather or pollutants. Ideal for the maintenance of teak decks. Film build-up must be avoided. Apply with a wide brush or lint free cloth.Thinner : Epifanes brush thinner for paint & varnish.Recoatable : Wet-on-wet.Coverage : 8-10 m² (85-100 ft²)

     AED 91.00
  • A clear, high gloss, traditional one-component varnish, based on tung oil, phenol and alkyd resin with excellent outdoor durability, containing an ultra violet filter protecting the wood against discolouration. For use on bare wood & intact existing (one and two component) varnishes both for inside and outside above the waterline. This varnish is famous for its high gloss retention, long lasting properties, unique flow characteristics and high build capacity even in tropical climates. Thinner : Brush application - Epifanes brush thinner for paint & varnish.                Spray application - Epifanes spray thinner for paint & varnish.Recoatable : After 24 hours at 18°C (65°F.).Coverage : One liter is sufficient for 14 m² (150 ft²).

    (4 items) from AED 45.00
  • A quick drying, clear, one-component, interior satin finish, based on a poly-urethane/alkyd resin. This interior finish gives superior protection against alcohol and other aggressive household chemicals. Apply as a finish coat over several build-up coats of Epifanes clear gloss varnish.Thinner : Brush application - Epifanes brush thinner for paint & varnish.                Spray application - Epifanes spray thinner for paint & varnish.Recoatable : After 12 hours at 18°C (65°F.).Coverage : One liter is sufficient for 13 m² (140 ft²).

    (2 items) from AED 77.00
  • A very quick drying, scratch resistant one-component water-based interior varnish providing a beautiful satin sheen. Other characteristics are outstanding flow ability and excellent resistance against alcohol and other household chemicals and very low on VOC. Suitable as water based alternative to traditional solvent based interior varnishes over several build-up coats of Epifanes clear gloss varnish. Apply by nylon brush and rollout along the grain of the wood. Shows milky in the can, but dries into a clear film.Thinner : All applications: fresh waterRecoatable : After 6 hours at 18°C (65°F.)Coverage : One liter is sufficient for 12 m² (130 ft²)

     AED 159.00
  • A clear, high gloss varnish-like finish with excellent adhesion to new teak and other exotic woods. For use where a glossy, varnished look is desired. Sanding between coats is not required when the next coat is applied within 72 hours. To be used on teakwood, iroco and as an alternative for continuous maintenance of wood oil systems, for interior and exterior work above the waterline in both fresh and salt water environments. When applied on non-oily wood that does not need to “breath” a minimum of 8-10 coats is required. Not suited on bankirai.Thinner : Brush application - Epifanes brush thinner for paint & varnish.                Spray application - Epifanes spray thinner for paint & varnish.Recoatable : After 24 hours at 18°C (65°F.). No sanding required if recoated within 72 hours.Coverage : One liter is sufficient for 12 m² (130 ft²).

    (2 items) from AED 80.00
  • A clear satin finish for use over Epifanes woodfinish gloss (one-component). Provides a beautiful, satin sheen for interior use.Thinner : Brush application - Epifanes brush thinner for paint & varnish.                Spray application - Epifanes spray thinner for paint & varnish.Recoatable : After 24 hours at 18°C (65°F.)Coverage : One liter is sufficient for 12 m² (130 ft²)

    (2 items) from AED 87.00
  • A quick and easy alternative to conventional varnish based on a modified alkyd/urethane resin combined with colourfast pigments for interior and exterior use. Provides a lightly tinted UV protecting finish. It bonds extremely well to teak and other oily woods, preventing discolouration and emphasizes the natural grain of the wood. No sanding between coats, excellent water resistance, great breathing properties and flexibility. An excellent protection in all climates. To be used for renewing weathered areas, as a stain prior to a varnish system or as a full system for those requiring the absolute best in a quick and easy satin finish with maximum durability, UV protection and longevity. Apply by brush, foam brush, roller or spray 3 to 4 coats. Stir well prior to use, do not thin and allow 5-6 hours between coats. Sanding between coats is not required. If topcoated with varnish, sand with 220 grit dry abrasive paper.Thinner : Do not thin.Recoatable : After 5-6 hours at 18°C (65°F.)Coverage : 750ml is sufficient for 10-16 m² (107-172 ft²) depending on substrate.

     AED 109.00
  • Superior quality, semi-gloss wood finish based on modified alkyd / urethane resins and UV filters. Rapidclear, providing excellent protection in all climates, is the answer for a quick and easy alternative to conventional varnish. For long term protection and enhancement of all interior and exterior marine and household woods above the waterline. Epifanes Rapidclear provides an enhancing UV protecting film. It bonds extremely well to teak and other oily woods, preventing discolouration and emphasizes the natural grain of the wood. Epifanes Rapidclear can be used for renewing weathered areas, prior to a varnish or as a full system for those requiring a quick and easy semi-gloss finish with excellent breathing properties, flexibility, maximum durability, UV protection and longevity. Apply by brush, foam brush, roller or spray 3 to 4 coats. Rapidclear can be applied every 5-6 hours. Three to four coats are sufficient under most conditions. Sanding between coats is not required. If topcoated with varnish, sand with 220 grit dry abrasive paper. Easy touch up and maintenance. Thinner : Brush application - Do not thin                Spray application - Epifanes spraythinner for paint & varnishRecoatable : After 5-6 hours at 18°C (65°F.)Coverage : 750 ml is sufficient for 10 m².

     AED 109.00
  • A high gloss, two-component, polyester saturated, aliphatic urethane finish with excellent outdoor durability. Contains a UV-filter. To be used on intact existing poly-urethane varnish systems, as a complete varnish system on bare dimensionally stable wood (i.e. marine plywood), as a build-up coat prior to a onecomponent varnish system, as a protective coat on epoxy resins or as an intermediate coat on epoxy resins when a one-component finish is desired. Suitable for fresh and salt water, for interior and exterior use. Mixing ratio is 2 parts component A to one part component B by weight. Each can of base is partially full. Pour the reactor (B) into the can of base (A) and stir thoroughly. Allow to activate for 20-30 minutes before use. Potlife after mixing 3-4 hours at 20°C (70° F.) Temperature should be between 15°C and 27°C (60°- 80°F.) during application.Thinner : Brush/ roller application - Epifanes poly-urethane brushthinner.               Spray application - Epifanes poly-urethane spraythinner.Recoatable : After 24 hours at 18°C (65°F.).Coverage : 750 g is sufficient for 9 m² (96 ft²).

     AED 208.00

Close

Share this page

Dear Friend,

Check out this awesome new product from Exalto Emirates!

Page: 02 Wood Care
Share to
Your detail
Close

Specifications

Specifications

Close