JL Audio Amplifier 12V 600W M600/6 6CH class D full range for systems with negative ground only (Until Stock Lasts)
Until Stock Lasts
Amplifier 12V 600W M600/6 6CH class D full range for systems with negative ground only (Until Stock Lasts)
Description
For 24V systems only: 6-Channel class D marine full-range amplifier, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 28.8V
This incredibly flexible amplifier packs a serious full-range punch, and delivers a staggering 100 watts to each of its six channels into 2 Ω (28.8V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is JL Audio’s NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency. With the M600/6-24V, you have lots of great options. Use it as a six-channel satellite amplifier with 75 W x 4 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200W x 2 @ 4 Ω to one pair of satellites and 75 W x 2 @ 4 Ω to a secondary pair of satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2. The M600/6-24V includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately see page 849), you have the ability to control the level of two, four or all six of the amplifier’s channel levels from a remote location. This marine amplifier features white and grey powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment. This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 V may result in damage to the product and will void the warranty.
Dimensions | |
Height (H) | 2.05”/ 52 mm |
Width (W) | 10.23” / 260 mm |
Depth (D) | 7.09” / 180 mm |
Net weight | 5.8 lb / 2.63 kg |
Model | M600/6-24V |
Frequency response | 12 Hz - 22 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping factor @ 4 Ω | >150 / 50 Hz |
Damping factor @ 2 Ω | >75 / 50 Hz |
THD+N @ Rated power | <1% @ 2 Ω per Ch. |
Input voltage range @ RCA inputs | 100 mV - 4 V RMS |
Min copper power / Ground wire gauge | 4 AWG wire |
Fuse rating | 30 A (AFS, AGU or MaxiFuse™) |
-
Physical Specification
Dimensions Height (H) 2.05”/ 52 mm Width (W) 10.23” / 260 mm Depth (D) 7.09” / 180 mm Net weight 5.8 lb / 2.63 kg
-
General Specification
Model M600/6-24V Frequency response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping factor @ 4 Ω >150 / 50 Hz Damping factor @ 2 Ω >75 / 50 Hz THD+N @ Rated power <1% @ 2 Ω per Ch. Input voltage range @ RCA inputs 100 mV - 4 V RMS Min copper power / Ground wire gauge 4 AWG wire Fuse rating 30 A (AFS, AGU or MaxiFuse™)
Product Options
Product | OEM | EEPN | Availability | Price | Qty |
---|---|---|---|---|---|
JL98272
|
08.17.0106
|
AED 2,356.00
|
|