Seahawk Anti-fouling Tuff Stuff primer White (1 gallon primer +1 gallon catalyst)
Description
Tuff Stuff is extremely effective for blister prevention on fiberglass, or as a bilge coating because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal. Tuff Stuff creates an overlapping barrier to eliminate any direct path for water migration.
Application controls
Method: Airless spray, conventional spray, solvent resistant rollers and brushes.
Colors: White- 1285
Finish/Sheen: Matte
Volume Solids: 52% +- 2%
Available Sizes: 1/2-Gallon Kit (2 quarts), 2-Gallon Kit (2 gallons)
Shipping Weight: 22 Lbs./2 Gallon Kit
Mix Ratio: 1:1 Side A, Side C
Induction Time: 20-30 minutes
Flash Point: 80° F
VOC: 444 Grams/Liter
Typical Film Thickness: 6-7.5 mils dry film thickness (DFT) per coat, (11.5-14.5 mils wet film thickness (WFT)
Recommended Coats: 2-4 depending on intended service
Theoretical Coverage: 140 Sq.Ft./Gal. @ 6.0 mils DFT
APPLICATION DETAILS:
Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes.
Dry Times and Overcoating Intervals:
Substrate Temp. | Touch Dry | Recoating With Tuff Stuff | Overcoating With Bottom Paint | |
Temp F˚ (C˚) | Min | Min | Max | Min |
73˚F (23˚C) | 2 hours | 3 hours | 6 days | 24 hours |
-
General Specification
Colors: White- 1285
Finish/Sheen: Matte
Volume Solids: 52% +- 2%
Available Sizes: 1/2-Gallon Kit (2 quarts), 2-Gallon Kit (2 gallons)
Shipping Weight: 22 Lbs./2 Gallon Kit
Mix Ratio: 1:1 Side A, Side C
Induction Time: 20-30 minutes
Flash Point: 80° F
VOC: 444 Grams/Liter
Typical Film Thickness: 6-7.5 mils dry film thickness (DFT) per coat, (11.5-14.5 mils wet film thickness (WFT)
Recommended Coats: 2-4 depending on intended service
Theoretical Coverage: 140 Sq.Ft./Gal. @ 6.0 mils DFTAPPLICATION DETAILS:
Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes.Dry Times and Overcoating Intervals:
Substrate Temp. Touch Dry Recoating With Tuff Stuff Overcoating With Bottom Paint Temp F˚ (C˚) Min Min Max Min 73˚F (23˚C) 2 hours 3 hours 6 days 24 hours
Product Options
Product | OEM | EEPN | Availability | Price | Qty |
---|---|---|---|---|---|
1284/GLKIT
|
13.04.0032
|
AED 1,204.00
|
|
||
1285W/GLKIT
|
13.04.0169
|
AED 1,027.00
|
|