JL Audio

JL Audio Amplifier 12V 600W M600/1 mono-block class D full range for systems with negative ground only (Until stock lasts)

OEM # JL98273
In stock
EEPN
08.17.0103

Until Stock Lasts

Secure Payments
Genuine Products
Easy Returns
Fast Delivery
AED 1,891.00
- +

FREE DELIVERY ACROSS THE UAE ON ALL ORDERS ABOVE AED 500

JL Audio

Amplifier 12V 600W M600/1 mono-block class D full range for systems with negative ground only (Until stock lasts)

Description

This potent monoblock amplifier employs JL Audio’s high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don’t let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 Ω load (14.4V, 1% THD).making it a great choice to drive higher power subwoofer systems. Designed specifically for  ubwoofer applications, the M1000/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz and a defeatable infrasonic filter (30 Hz, 24 dB/oct.). With the addition of an HD-RLC remote level control (sold separately), the amplifier’s subwoofer output level or master volume for all channels can be directly controlled from the helm. The M1000/1v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. This amplifier features white and gray powder-coat finish, a gasketed cover for the controls and stainless steel hardware for
durability in the marine environment

  

Height (H) 2.05” / 52 mm
Width (W) 8.52” / 216 mm
Depth (D) 7.09” / 180 mm
Net weight 4.6 lb / 2.06 kg
Part number  08.17.0103 
Model  M600/1 
Frequency response 7 Hz - 500 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >59 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping factor @ 4 Ω >1000 / 50 Hz
Damping factor @ 2 Ω >500 / 50 Hz
THD+N @ Rated power <1% @ 2 Ω per Ch.
Input voltage range @ RCA inputs 100 mV - 4 V RMS
Min copper power / Ground wire gauge 4 AWG wire
Fuse rating 50 A (AFS, AGU or MaxiFuse™)
  • Physical Specification

      

    Height (H) 2.05” / 52 mm
    Width (W) 8.52” / 216 mm
    Depth (D) 7.09” / 180 mm
    Net weight 4.6 lb / 2.06 kg

  • General Specification

    Part number  08.17.0103 
    Model  M600/1 
    Frequency response 7 Hz - 500 Hz (+0, -1dB)
    S/N Ratio, referred to highest rated power >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    S/N Ratio, referred to 1 W >59 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    Damping factor @ 4 Ω >1000 / 50 Hz
    Damping factor @ 2 Ω >500 / 50 Hz
    THD+N @ Rated power <1% @ 2 Ω per Ch.
    Input voltage range @ RCA inputs 100 mV - 4 V RMS
    Min copper power / Ground wire gauge 4 AWG wire
    Fuse rating 50 A (AFS, AGU or MaxiFuse™)

Write Your Own Review
You're reviewing:Amplifier 12V 600W M600/1 mono-block class D full range for systems with negative ground only (Until stock lasts)
You May Also Like