Exalto Emirates LLC.

0 Items

Products added to your cart

0 Items

You have no items in your shopping cart.

Macerator Pumps


  • The electric pumps “MVG” series are volumetric pumps. A metal single-thread helical rotor formed by an endless screw turns in a floating rubber stator with double-thread helical profile. The pump can practically manage all types of fluid like dirty, viscous and/or with suspended parts. Even if they are self-priming pumps, in order to allow the self-priming and lubricate the stator it is necessary to fill the body pump with water. Gianneschisuggests to install a non-return valve on the suction pipe in order to prevent the pump emptying. At the first start or after a long time of no use, it is important to verify the correct direction of rotation in order to avoid the unscrewing of the rotor. ApplicationsEmptying of waste, liquid with small suspended parts etc. Construction features Body pump: BronzeScrew rotor: Stainless steel AISI 316Stator: Bunan NBRMechanical seal: Graf-allox-NBRUniversal joint: Stainless steel AISI 316Motor shaft: Stainless steel AISI 316 Motors Insulation: “F” classProtections: “IP 22”for dc ; “IP 54/55” for acVoltages: 12 - 24 V dc, 1Ph 230V ; 3Ph 230/400V ac 50/60 Hz

    (3 items) from AED 7,929.00
  • The electric pumps “MVI” series are volumetric pumps. A metal single-thread helical rotor formed by an endless screwturns in a floating rubber stator with double-thread helical profile. The pump can practically manage all types of fluid like dirty, viscous and/or with suspendedparts. Even if they are self-priming pumps, in order to allow the self-priming and lubricate the stator it is necessary tofill the body pump with water. Gianneschisuggests to install a non-return valve on the suction pipe in order to prevent the pump emptying. At the first start or after a long time of no use, it is important to verify the correct direction of rotation in order to avoid the unscrewing of the rotor. ApplicationsEmptying of waste, liquid with small suspended parts pumping, etc. MotorsInsulation: “F” classProtections: “IP 22”for dc ; “IP 54/55”for acVoltages: 24V dc 1Ph 230V; 3Ph 230/400V ac 50 Hz  

    (5 items) from AED 14,091.00
  • Robust diaphragm pump passes solids and is particularly effective in emptying holding tanks. The multipositional pump head offers a variety of installation options. • 5 gpm (19 lpm) output.• Self-priming up to 10 ft (3 m).• Capable of extensive dry running.• Compact and simple design.• Quiet running.• Flexible installation.• Corrosion resistant parts.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition protection).• ISO 8849 MARINE (Bilge pump standard). Fitting: Connections for 1½” (38 mm) ID hose.Sizes: 10.9” long x 6.1” wide x 4.4” high (27.7 cm x 15.5 cm x 11.1 cm). 2.7 kg

    (3 items) from AED 1,406.00
  • The latest version of the Macerator Pump now has a fully sealed motor and a new more powerful chopper blade. The sealed motor consists of o-ring sealed end bells, sealed bearings and a hard durable powder coating to prevent corrosion occurring both internally and externally. A new four bladed chopper has been added to further reduce the possibility of clogging. The pump still has the Run- Dry feature present in previous models. • Triple sealed motor to prevent both interna land external motor corrosion.• New four-bladed chopper reduces clogging.• Detects the absence of fluid then shuts-off pump before impeller is damaged.• Sensor provides adequate run-dry period to allow initial priming of the pump.• Flow rate 12 gpm (45 lpm).• Self-priming to 4 ft (1.2 m) vertical lift.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition protection). Fitting: Inlet port: 1½” (38 mm) hose barb plus 1½” NPT. Inlet port, RV model: 3” (75 mm) hose discharge port: 1” (25 mm) hose barb.Sizes: 11⅜” Long x 4¾” wide x 3⅝” high (29 cm x 12 cm x 9 cm). RV model is only 8¼” (21 cm) long. 2.3 kg

    (2 items) from AED 937.00
  • Suitable for pumping “grey” and “black” waste water, this latest version of the popular Vetus waste water pump is now supplied with rotating hose connections. The connection possibilities are greatly extended and the installation time can be reduced. In common with previous models, this new pump also features reliable duck-bill valves. The pump is self priming and available in 12 or 24 Volt versions.

    (2 items) from AED 1,477.00
  • Designed to empty holding tanks. As the pump is not self-priming, it is important to be fitted either at the lowest part of the tank or lower than the tank itself. Made of bronze with brass impellers and a stainless steel shaft. Easy and quick to take apart for maintenance or service. Maximum running period : 15 min/hourConnections : suction: 2” - discharge: 1”Discharge head : 5mDimensions : L x w x h = 270 x 125 x 140 mm

    (2 items) from AED 4,043.00
  • Designed to empty large holding tanks. Holding tank capacity should be about 1 m3. As the pump is not self-priming, it is important to fit the pump either at the lowest part of the tank or lower than the tank itself. Made of bronze and stainless steel. Easy to take apart. Maximum running period : UnlimitedConnections : suction : 2” - discharge: 1”Discharge head : 6mDimensions : L x w x h = 390 x 180 x 140 mm

    (4 items) from AED 8,837.00
  • Designed to empty holding tanks. The motor is fitted on top of the tank. Suction pipe available in any length of 200 to 600 mm. Please tell us the length (depth of your tank) when ordering. The pump is made of bronze and stainless steel and is not self-priming. Maximum running period Unlimited Consumption 0.3 kW Connection 1” Suction lift capacity None Discharge head 5 m Diameter 195 mm  

     AED 10,090.00
  • This heavy duty macerator pump is self priming and has a dual voltage 110/240 volt 50 Hz AC motor making it ideal for heavy duty commercial applications on larger craft - or for dockside waste pumpout. 53LPM capacity at open flow empties waste tanks in a short time. • Self primes to 4 ft (1.2m)• 53 Litres per minute flow (14 GPM) at open flow• 44 Litres per minute flow (12 GPM) at 3 metre head• Thermal overload protected motor Inlet port size: 38 mm Barbed and 1 1/2” NPT threadedDischarge port: 25mm (1”) hose Barb

     AED 4,524.00
  • El/pump “BMA-S” series are double volute and wearing plane for more rapid priming at outstanding performance. Innovative body pump with a special design that allows the expulsion of air easier. Operating principle and simple construction, combined with the high quality of the components, make this pump suitable for wide range of applications. BMA-S series are available in 2 impeller profile: Profile B (low impeller) are particularly indicated for plant water supply and circulation (Ex. Swimming pool filling, air conditioning, circulation and cooling system, etc.) Profile A (high impeller) plant water supply and circulation where better pressure is required but also where a fast priming capacity is needed (Ex. Bilge, fire-fighting, ballast, etc.) ApplicationsFire-fighting, emptying and emergency bilge, ballast, chain washing, water supply,swimming pool filling, air conditioning system, cooling system. Motors• Insulation : “F” class• Protections :“IP 20 / 22” dc.; “IP 55” ac• Voltages : 24V dc: 230V 1~ 50Hz ac: Δ220÷240V Y380÷415V,Δ380÷415V 3~ 50Hz ac: 60Hz On request

    (2 items) from AED 14,725.00

The word "macerate" comes from the Latin "macero" meaning to soften by soaking (in a liquid).

Exalto Emirates has helped many mariners by offering different types of macerator pumps which are sometimes called as waste pumps or toilet waste pumps and by offering sewage systems for hygienically collecting and treating wastes and to stay in compliance with Marpol regulations.

A Macerator Pump is a kind of pump that is connected to a toilet system (or in some cases included in the toilet itself if you buy a macerator toilet) that grinds up solid waste so that it can be pumped against gravity more effectively.

Protecting global waterways from waste is governed by multiple international laws and regulations. Operators of river and ocean going vessels along with offshore platform application must take care to manage multiple types of waste including the crew sewage and food waste. These wastes are ground by using macerator pumps which are used to keep your onboard wastewater system flowing freely. They grind up all kinds of debris into small particles minimizing solids backups that require clean out. This not only reduces maintenance costs, but also protects the health of the crew.

Close

Share this page

Dear Friend,

Check out this awesome new product from Exalto Emirates!

Page: 12 Macerator Pumps
Share to
Your detail
Close

Specifications

Specifications

Close