Exalto Emirates LLC.

0 Items

Products added to your cart

0 Items

You have no items in your shopping cart.

Fittings


  • Saddle Clips & Bases are designed for tidy routing of cables, wires, and plumbing hoses. The Base can either be screwed or glued to a wall or bulkhead providing a ‘mounting base’ which can be used on its own with a cable-tie for tying down cables and wires or have one of four sizes of Saddle Clips attached to it for supporting various diameters of plumbing hose. For increased security, a cable-tie can be threaded through the Base under and around the Saddle Clip and hose then done up, locking all components together. If plumbing layouts change in the future, simply remove the hose from the Saddle Clip, then pinch the arms of the Saddle Clip together to unclip and detach it from the Base. A different size of Saddle Clip can then be clicked on to the Base to accept a different diameter of plumbing hose. Base available in 1 size supporting 4 sizes of Saddle Clips which cover a range of varying hose diameters Multi-purpose Base. Dual mounting options for Base – adhesive or screws (or both). Click-on Saddle Clips for mounting Hoses on to Base. Dovetail grooves on underside of Base. Durable, flexible Saddle Clip arms. Base manufactured from UV stabilised, composite glassreinforced Nylon 6(PA6). Saddle Clips manufactured from UV stabilised Acetal copolymer (POM).

    (5 items) from AED 3.00
  • Mould Plugs are designed to form the recess in a fibreglass (GRP) hull that is required for the flush fitment of a given size ® Recessed Skin Fitting. Moulded from Polypropylene, they are single-use, throwaway items that significantly reduce the time and complexity traditionally involved with the installation of Recessed Skin Fittings. Now, each recess can be formed in the hull during fibreglass lay-up, rather than requiring the hull to be CNC machined or manually cut and shaped at each thru-hull position after demoulding.

    (4 items) from AED 4.00
  • Manufactured from a glass reinforced nylon composite material these hose tail adaptors display high strength and high durability, allowing for secure clamping of hoses.

    (8 items) from AED 13.00
  • Angled Tails suited to the most common sizes of tubing used in marine plumbing. Tails come packaged with a blue seal to allow fitting to be rotated to a more suitable position if required.

    (4 items) from AED 22.00
  • These elbows allow for the most efficient routing of hose connections to and from Aquavalves.

    (4 items) from AED 22.00
  • Designed and made in New Zealand, Tru-Design Tank fittings can be utilized to create a simple holding tank design for retro-fitting to older vessels. This may be an easier solution than installing under floor holding tanks and associated pumps and plumbing. With many holding tanks supplied with 11⁄2” BSP threaded connections, the range of Tank Fittings have been designed for easy and versatile plumbing. Tru- Design Tank Fittings are customized versions of our standard components. When combined with the Tank Fitting Tube they extend the range of plumbing options available.

    (4 items) from AED 32.00
  • Designed and made in New Zealand, Tru-Design Tank fittings can be utilized to create a simple holding tank design for retro-fitting to older vessels. This may be an easier solution than installing under floor holding tanks and associated pumps and plumbing. With many holding tanks supplied with 11⁄2” BSP threaded connections, the range of Tank Fittings have been designed for easy and versatile plumbing. Tru- Design Tank Fittings are customized versions of our standard components. When combined with the Tank Fitting Tube they extend the range of plumbing options available.

    (4 items) from AED 34.00
  • The Threaded Vent Plug is used for tank ventilation. The 3⁄4” female thread allows connection to tails or elbows for tank venting.

     AED 25.00
  • The Tank Adapter Plug is used to create custom connections. The top of the plug can be drilled and tapped to fit other connection types.

     AED 23.00
  • The threaded connector was designed to allow connection of rigid PVC piping to the Aquavalve. One end fits into the Aquavalve, sealing on the red seal ring. The other end fits a PVC female adapter (iron to PVC socket), sealing with thread tape

     AED 30.00
  • The tails have parallel threads for sealing using thread tape, and long tails for secure double clamping of hoses.

    (9 items) from AED 14.00
  • These female thread (NPSM) to hose barb adapters are primariy used as adapters to fit on the outlet of pumps. The female 3⁄4”-14 thread fits on the male threaded outlet of pumps from all major marine pump manufacturers. The adapter allows connection of 3⁄4” ID hose to the threaded outlet of the pump. The adapters can be used for other applications requiring conversion from 3⁄4”-14 NPSM to 3⁄4” barb.

    (2 items) from AED 26.00
  • This long thread 90° tails are designed to screw into the range of ball valves but can also be used in many applications. Moulded in glass reinforced composite nylon 6 these tails are also suitable for use in contact with petrol and diesel.

    (7 items) from AED 18.00
  • This range of long thread 120° tails are designed to screw into the range of ball valves but can also be used in many applications. Moulded in glass reinforced composite nylon 6 these tails are also suitable for use in contact with petrol and diesel.

    (3 items) from AED 19.00
  • Part number 04.08.0970 Part number 04.08.0971 Part number 04.08.0972 Part number 04.08.0973 Part number 04.08.0974 Part number 04.08.0975

    (9 items) from AED 13.00
  • When plumbing in the tight confines of a boat, the bend radius for flexible hose can lead to messy installations. To combat this Trudesign has the 90° connector, allowing hose to be run into corners and around edges of bulkheads.

    (8 items) from AED 26.00

Close

Share this page

Dear Friend,

Check out this awesome new product from Exalto Emirates!

Page: Fittings
Share to
Your detail
Close

Specifications

Specifications

Close