Exalto Emirates LLC.

0 Items

Products added to your cart

0 Items

You have no items in your shopping cart.

Fuel & Oil Pumps


  • The Porta-QuickTM portable oil changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel’s own power supply to operate the powerful oil reservoir mounted flexible impeller pump.• 14 Quart (13 liter) container easily handles two engines.• Pump is reversible to both drain and refill engine oil.• Sturdy bronze pump head.• High temperature resistant TeflonTM dip-stick probe.• Non-collapsible thick wall suction hose.• Garden hose thread adapter included, for dip-sticks with GHT male threaded ends.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected). Output : Up to 7 Lpm (1.5gpm) @ 1m head.Sizes : 155⁄8” high x 131⁄2” diameter (35 cm x 34 cm). Hose - 1⁄2” (13 mm) ID x 48” (120 cm) long. Probe - 1⁄4” (6.5 mm) OD x 40” (100 cm) long.Weight : 9 lb. (4.1 kg)

    (3 items) from AED 1,309.00
  • The Oil Change System consists of a robust self-priming flexible impeller pump mounted to an easy to install base and coupled to a five port manifold, factory fitted with three full flow ball valves.• The system includes a pump reversing switch to pump used oil out and new oil in.• The system cover includes a hinged valve cover to protect them from being accidentally opened.• The valve cover will not close after an oil change unless valves are securely closed.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).Sizes : 51⁄4” high x 10 7 ⁄ 8 ” wide x 11” deep (13 cm x 28 cm x 28 cm). Ball valves - 1⁄2” NPT.Weight : 9 lb. (4.1 kg).

    (3 items) from AED 210.00
  • The Do-it-Yourself oil changer is simple to use, and offers quick and easy oil changes for the leisure boat owner.• Fully assembled.• 14 Quart (13 liter) container.• Tested for 1400 cycles.• 8’ (2.49 m) dipstick hose.

     AED 872.00
  • Self-priming fuel transfer pump, suitable to deliver oil and diesel fuel or to exchange motor oil. The body and gear wheels are made of bronze and the shaft is made of stainless steel. The shaft sealing is mechanical which has the advantage of being fully free of maintenance. Please note that both hoses (suction and discharge) should never be narrowed in any way. Maximum running period : 1 hourConnections : 3⁄8”Suction lift capacity : 3 mDischarge head : 15 mL x w x h : 180 x 100 x 120 mm

    (2 items) from AED 6,943.00
  • The Oil Change Pump is the same high quality pump used in the Jabsco multi- engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes.• Pump is reversible to both drain and refill engine oil.• Self-priming to 3 ft (1 m) of lift.• Includes 3⁄8” NPT full flow ball valve.• Reversing switch guard to avoid accidental activation..• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected). Fitting : Connections for 3⁄8” NPT male threaded fittingSizes : 77⁄8” long x 33⁄4” wide x 7 7 ⁄ 16 high (20 cm x 10 cm x 11 cm).Weight : 9 lb. (4.1 kg)

    (3 items) from AED 1,443.00
  • Compact polished brass multi-purpose hand pump.• Ideal for small engine and gearbox oil drain.• Simply pump old oil out with dipstick probe.• Oil and corrosion resistant brass and neoprene construction with up to 1 gpm (4 lpm) output.• Small enough to fit any tool box.

     AED 239.00
  • Versatile polished brass multi-purpose hand pump.• Drain, fill or top up engine and gearbox oil.• Overcomes problem of hard to reach drain plugs and filler caps.• Oil and corrosion resistant brass neoprene construction with up to 11⁄2 gpm (6 lpm) output.• 1001 other uses on any boat.

     AED 357.00
  • Self-priming gear pumps suitable for low/medium viscosity liquids, without suspended solid parts Standard version provided with by-pass valve (IN model excluded) Applications Diesel oil, fuel, lubricant or similar liquids intake For fluids with viscosity up to 6° E. Maximum standard working temperature 90°C  Motors• Insulation : “F” class• Protections : “IP 22”for dc ;“IP 44/55” for ac• Voltages : 12-24V dc 230V 1Ph; 230/400V 3Ph ac 50/60Hz

    (14 items) from AED 4,180.00
  • Pump group ready to be installed on board. Suitable for diesel oil, fuel, lubricant or similar liquids intake. For fluids with viscosity up to 6° E. Maximum standard working temperature 90°C. Mounted on a strong aluminium base complete with vibration dampers. The system is supplied with a flux switch and two manifolds. It is suggested to install an over- pressure device on the fluid transfer line. Number of mounted valves according to customer specification. ApplicationsTechnical characteristics according to “IN – FQ” electrical pumps series in the execution without by-pass.

    (9 items) from AED 8,354.00
  • • Stores easily.• Compact, robust tank design.• Easy-pour spout with screw-on cap.• Easy-to-carry handle.• 3-1/2 gallon (13L) sealed container.• Self-priming, run-dry pump.• Battery Leads: 6’ (1.8m) with alligator clips.• Suction Tube: 8’ (2.4m), oil and heat resistant.• Powerful 12V DC motor makes oil changing quick and simple.• 6’ (2m) electrical wire for easy connection to 12 volt power supply.• Battery clamp leads and on/off switch to make pumping process quick and simple.

     AED 791.00
  • Rotary, self priming vane pump for fuel transfer. Nozzles with automatic shut-off when tank is full ON/OFF switch for el/pump. Displacement meter zero setting and totalising meter By-pass valve. All components are fixed on single panel. ApplicationsFor fuel distribution on boat (private use)

    Price on request
  • Light duty, 40 minute rated diesel pump.• 9 gpm (35 lpm) at 10ft (3m) head.• 20ft (6m) maximum total head.• Self-priming up to 9ft (2.8m) vertical lift.• 22°F (-30°C) to 104°F (+40°C) operating temperature range.• 35 minutes at 10ft (3m) at 86°F (30°C).• IP55 Motor.• Integral switch and fuse fitted as standard.• Accessories available.• ISO 8846 MARINE (Ignition Protection).• Aluminium body & cast iron pump head. Fitting : Connections for 3⁄4” (19mm) ID hoseSizes : 7” long x 51⁄2” wide x 41⁄2” high (19cm x 11cm x 14cm).Weight : 4.4lb (2kg).

     AED 1,338.00
  • Continuously rated, diesel pump.• 13.2 gpm (50 lpm) at 10ft (3m) total head.• Self-priming up to 9.6ft (3m) vertical lift.• 22°F (-30°C) to 104°F (+40°C) operating temperature range.• IP55 motor.• ISO 8846 MARINE (Ignition Protection).Fitting : Connections for 1” (25mm) ID hose, or 3⁄4” BSP.Sizes : 81⁄2” long x 5” wide x 51⁄4” high (23cm x 13cm x 15cm).Weight : 5kg (11lb).

     AED 2,386.00
  • Heavy duty, continuously rated, diesel pump.• 28 gpm (105 lpm) at 10ft (3m) total head.• Self priming up to 16ft (5m) vertical lift.• 22°F (-30°C) to 104°F (+40°C) operating temperature range.• IP55 and thermal protected motor.• ISO 8846 MARINE (Ignition Protection). Fitting : Connections for 3⁄4” (19mm) ID hose, or 1” BSP.Sizes : 101⁄2” long x 53⁄4” wide x 71⁄4” high (27cm x 14.5cm x 18cm).Weight : 19.8lb (9kg)

     AED 4,294.00

Close

Share this page

Dear Friend,

Check out this awesome new product from Exalto Emirates!

Page: 17 Fuel & Oil Pumps
Share to
Your detail
Close

Specifications

Specifications

Close