Exalto Emirates LLC.

0 Items

Products added to your cart

0 Items

You have no items in your shopping cart.

Manual Pumps


  • ApplicationsSuitable for pumping aggressive liquids, for fresh or sea water. Bilge emptying, tanks, diesel oil intake, oil, etc..  MotorsExcelsior: High head double acting semi-rotary wings pump, suitable for lifting and pushing of clear liquids Super-larioSelf priming double acting pistons pump, recommended for high suction lift installation (up to 9 m) also in case of complex plant (not back straight pipe line). JollyLight and cheap pump with a big water delivery at low head. Suitable for dirty liquids.

    (6 items) from AED 3,417.00
  • ApplicationsSuitable for pumping aggressive liquids, for fresh or sea water. Bilge emptying, tanks, diesel oil intake, oil, etc.. Construction features GB: Body pump of cast iron, internal parts of bronze B: Body pump and internal parts of bronze MotorsExcelsior: High head double acting semi-rotary wings pump, suitable for lifting and pushing of clear liquids Super-larioSelf priming double acting pistons pump, recommended for high suction lift installation (up to 9 m) also in case of complex plant (not back straight pipe line). JollyLight and cheap pump with a big water delivery at low head. Suitable for dirty liquids.

    (4 items) from AED 9,419.00
  • ApplicationsSuitable for pumping aggressive liquids, for fresh or sea water. Bilge emptying, tanks, diesel oil intake, oil, etc.. Construction features•  GB: Body pump of cast iron, internal parts of bronze•  B: Body pump and internal parts of bronze Motors    Excelsior: High head double acting semi-rotary wings pump, suitable for lifting and pushing of clear liquids Super-larioSelf priming double acting pistons pump, recommended for high suction lift installation (up to 9 m) also in case of complex plant (not back straight pipe line). JollyLight and cheap pump with a big water delivery at low head. Suitable for dirty liquids.

     AED 1,576.00
  • Self-lubricating, manual pump. Manufactured of brass in a housing of cast iron (brass housing only when mentioned in the table). Suitable for pumping oil and water.

    (9 items) from AED 715.00
  • For mounting on bulkhead or deck.• Repositionable ports and body offer an amazing 96 assembly variations.• Sustainable 12 gpm (45 lpm) output. Self-priming up to 13 ft (4m).• Corrosion resistant materials throughout.• Stainless steel handle supplied with mounting clips and provision for safety lanyard. Fitting: Connections for 1” (25 mm) ID hoseSizes: 7” wide x 8” deep x 4¾” high (18 cm x 20 cm x 12 cm)Weight: 1.4 lb. (0.6 kg).

    (2 items) from AED 559.00
  • For mounting through deck or through bulkhead.• The ultimate compact through deck pump with no less than 16 port variations elative to the body.• Readily achievable 13 gpm (50 lpm) output.• Self-priming up to 16 ft (5 m).• Loosening just one screw lets you clear blockages or position the body anywhere through 360° relative to the handle position.• Compact design and low profile allow installation in confined spaces.• Sleekly styled through deck kit and cover, with 4 mounting positions relative to the pump.• Excellent solids handling ability for use with holding tanks.• Corrosion resistant materials throughout.• Stainless steel handle supplied with mounting clips and provision for safety lanyard. Fitting: Connections for 1” (25 mm) ID hose or 1 ½” (38 mm) hose.Sizes: 10” long x 4 5⁄16” wide x 4 ½” deep (25 cm x 11 cm x 12 cm).Weight: 21⁄2 lb. (1.2 kg).

    (3 items) from AED 459.00
  • For mounting on bulkhead, through bulkhead, on deck or through deck.• Unique safety feature allows operation from both inside and outside the cabin (with optional through deck kit).• Flow rate of up to 25 gpm (100 lpm).• Self-priming up to 10 ft (3 m).• Push-fit inlet and outlet elbows swivel through 360° to increase flexibility of installation still further.• Corrosion resistant materials throughout.• Quick release clamp ring gives fast access for blockage clearance.• 1½” (38 mm) ports give excellent solids handling ability for use with holding tanks.• Stainless steel handle supplied with mounting clips and provision for safety lanyard. Fitting : Connections for 1 ½” (38 mm) ID hose.Sizes : 9 ½” wide x 9 ½” high x 6” deep (24 cm x 24 cm x 15 cm).Weight : 2.9 lb. (1.2 kg).

    (4 items) from AED 451.00
  • For mounting on bulkhead, through bulkhead, on deck or through deck.• Robust design particularly suited to workboats and larger leisure craft, or any installation where particularly heavy duty use is anticipated.• 18” (45 cm) handle assists sustained high outputs of up to 35 gpm (135 lpm).• Self-priming up to 17.5 ft (5.5m).• Double diaphragm design gives maximum efficiency, and added safety.• 1½” (38 mm) ports give large solids handling ability.• Can function on one diaphragm in an emergency.• Corrosion resistant materials through out. Fitting: Connections for 1 ½” (38 mm) ID hose.}Sizes: 14” wide x 9 ½” high x 8” deep (35.5 cm x 24 cm x 20 cm).Weight: 11 lb. (4.95 kg).

    (4 items) from AED 86.00
  • (3 items) from AED 90.00

Close

Share this page

Dear Friend,

Check out this awesome new product from Exalto Emirates!

Page: 13 Manual Pumps
Share to
Your detail
Close

Specifications

Specifications

Close